To adjust the ringer volume in the
base station
There are seven levels: 0 = off, 6 = high.
(Standard setting is 6.)
• Press the STO button.
• Press the
#
button.
• Press the ✱ button.
• Press the 5 button. Display shows
the volume level set. Ringer sounds
a sample level.
• Press a button between 0 (OFF) – 6
to set the new level. Display shows the
new level.
• Press the STO button to confirm the
setting.
To adjust the tone of the base station
ringer
There are six levels: 1 = low, 6 = high.
(Standard setting is 1.)
• Press the STO button.
• Press the
#
button.
• Press the ✱ button.
• Press the 6 button. Display shows the
volume level set.
• Press a button between 1-6 to set
the new level. Display shows the
new level.
• Press the STO button to confirm the
setting.
‘Confirmation’ tones
Whenever you press a button on the
phone you will hear a confirmation
beep. You can turn this sound on and
off (standard setting is ON).
• Press the STO button.
• Press 3 then 1. Display shows the
current setting: 1 = ON, 0 = OFF.
• Press 1 to switch the tone ON.
Or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the
new setting.
‘Wrong key’ tone
When you are following a set order
instruction, your Diverse handset will
give a warning if you press the wrong
key in the sequence. You can turn this
sound on and of (the standard setting
is ON).
• Press the STO button.
• Press 3 then 4. Display shows the
current setting: 1 = ON, 0 = OFF.
• Press 1 to switch the tone ON.
Or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the
new setting.