39
Is the handset out of range?
To check this press the
PHONE button
whilst symbol is flashing, you will
hear four short beeps from the handset.
The base station or handset does
not ring
The ringer volume may be set too low,
or switched off at the base station. To
adjust the ringer volume at the handset,
see page 27.
The telephone line cord may not be
plugged in. Please check.
You can’t get a connection or you get
the wrong connection after speed
dialling when connected to a
switchboard.
Have you entered an access code? See
relevant base station user guide.
Handset beeps
Are the handset batteries low? You will
hear a beep every 30 seconds. If is
flashing, you will hear four short beeps
when you press the PHONE button.
Check you are still within range of the
base station.
Please note: If you go out of range of
a base station for a long time while your
handset is switched ON, it may take
more than 20 minutes to ‘find’ the base
station again when you come back within
range. However, by simply switching the
handset OFF for a moment, and then
ON again, it will find the base station
within a few seconds.
