11 Using and changing the
security code and handset PIN
As a digital phone system, your Diverse 1010
provides excellent security against others
‘listening in’ to your calls. You can also
prevent unauthorised use of the handset(s).
Each handset needs to be registered with the
base unit. To do this you need to know and use
the system code.
The factory setting for both the system code
and handset PIN is 0000. If you do not wish to
change either, you can use this number for all
code and PIN related functions.
To change a system code for the Diverse
1010 base unit
This protects your settings and helps prevent
unauthorised handsets using your system.
The factory setting for the system code is 0000.
You can change this to any 4-digit number.
Handset power must be switched to
ON. And
you must be in range of the base unit.
• Press the STO button then the
#
button.
• Press 8 on the keypad.
• Press the
✱
button.
• Enter the current system code. Factory
setting is 0000.
• Enter the 4-digit code you want.
• Confirm the code by entering it again.
• Press the STO button. The code is now
entered.
• Press the PHONE button.
To set or change the handset PIN (personal
identification number)
A PIN on your handset protects information,
such as numbers stored on the memory, from
unauthorised access.
A handset PIN is necessary in order to:
reset the speed dial memory
reset to the original factory settings.
Handset power must be switched to ON.
• Press the STO button.
• Press 8 then 9 on the keypad.
• Enter the current PIN. Factory setting
is 0000.
• Enter the 4-digit PIN you want.
• Confirm the PIN by entering it again.
• Press the STO button. The PIN is
now entered.
Caution
Do not forget your system code or handset PIN.
Special, expert help is required if you forget the
system code. Please contact the Diverse 1010
Helpline on 0345 908070. Calls are charged at
local rates. Your base unit may need to be returned
and you may have to pay a charge for re-setting the
system code.
