Making and ending calls
To make a call
Lift the handset and wait for the
dial tone.
Dial the telephone number.
To end a call
Replace the handset.
To receive a call
When the telephone rings the call
indicator light will also flash to
indicate that there is an incoming
call. Simply pick up the handset.
To redial the last number
called
Lift the handset.
Press the REDIAL button.
The last number called is dialled.
A redial number can be no longer
than 32 digits.
Secrecy
When on a call you can talk to
someone in the same room,
without your caller hearing.
To switch secrecy on and off
During a call press and release the
SECRECY button.
The call indicator light will flash to
show that secrecy is on.
Your caller will be put on hold.
You can now talk to someone in
the room without your caller
hearing you.
Press and release the SECRECY
button again to return to your
caller.
To adjust the ringer volume
There are 3 volume settings to
choose from: HIGH, LOW or OFF.
The default setting is HIGH.
Lift the handset and press the
STORE button. The call indicator
light will flash.
Press the
✱
button.
Press either, 1 for HIGH, 2 for
LOW or 3 for OFF.
Press the STORE button.
You will hear a confirmation tone.
Replace the handset.
(If the ringer is set to OFF, the call
indicator light will still flash to
indicate someone is calling you.)
To set the ringer pitch
The ringer pitch can be set to
High or Low. The default setting
is High.
Lift the handset and press the
STORE button. The call indicator
light will flash.
Press the
#
button.
Press either, 1 for HIGH or 2 for
LOW.
Press the STORE button.
You will hear a confirmation tone.
Replace the handset.
One-Touch memories
You can store your three most
frequently used telephone numbers
in the One-Touch memories
(M1, M2 or M3). Please note that
the number can be no longer than
18 digits.
To store a One-Touch number
Lift the handset.
Press the STORE button. The call
indicator light will flash.
Press the memory location number,
(M1
, M2, M3), under which you
want to store the number.
Enter the telephone number you
want to store including the area
code if applicable.
Press the STORE button.
You will hear a confirmation tone.
Replace the handset.
To dial a One-Touch number
Lift the handset and wait for the
dial tone.
Press the memory location
number, (M1
, M2, M3), under
which the number is stored.
The number is dialled
automatically.
To insert a pause in a memory
number
Sometimes you may need to enter
a pause when storing a number,
e.g. with an overseas number you
may need to enter a pause after
storing the international code.
Press the REDIAL button in the
place where you want to enter a
pause.
When you dial the number your
BT Decor 110 will automatically
insert the pause where you
stored it.
Quickdial memories
You can store a further 10 telephone
numbers in the Quickdial memories.
Please note that the numbers can
be no longer than 18 digits long.
To store a number in the
Quickdial memory
Lift the handset.
Press the STORE button.
The call indicator light will flash.
Press the memory location
number between 0 and 9 under
which you want to store the
number.
Enter the telephone number you
want to store including the area
code if applicable.
Press the STORE button.
You will hear a confirmation tone.
Replace the handset.
To dial a number in the
Quickdial memory
Lift the handset and wait for the
dial tone.
Press the QUICKDIAL button.
Press the memory location
number between 0 and 9, under
which the number is stored.
The number is dialled automatically.
Note
Whilst storing a number in the
memory you can cancel the
operation by replacing the handset
on the cradle.
Setting up
Plan the location of your
BT Decor 110.
Situate your BT Decor 110 close
enough to a phone socket so that
the line cord will reach.
You can wall-mount your product,
see back page.
1. Plug your BT Decor 110
into the telephone socket.
Your BT Decor 110 is now ready
for use.
Using the telephone
At a glance
Quickdial button
Allows you to dial up to ten numbers
stored in the Quickdial memory at the
touch of two buttons.
One-Touch memory buttons
(M1, M2, M3)
Allows you to store and
automatically dial up to three
numbers at the touch of one
button.
Store button
Use to store numbers in the memory
and to change the ringer and pitch
volume.
Call indicator light
Flashes to indicate an incoming call.
Also flashes when storing numbers,
using secrecy or setting the ringer.
Redial/Pause button
Redials the last number called.
Also, press to enter a pause when
storing a number in the memory.
Secrecy button
Lets you talk to someone in the same
room without the person you are
calling hearing you.
Recall button
For use with a switchboard/PBX and
BT Calling Features. Please contact
your switchboard supplier for more
information. For more information on
BT’s Calling Features please call
Freefone 0800 800152
Handset hook
Keeps the handset in place when the
BT Decor 110 is wall mounted.
See back page for more information.
Revolve the handset catch on the
base unit. The handset will now be
able to rest on the hook when
wall-mounted.
Safety information
General
Simply clean your BT Decor 110 with a
damp (not wet) cloth, or an anti-static
wipe. Never use household polish as this
may damage the product. Never use a
dry cloth as this may cause static shock.
Do not open the BT Decor 110. This
could expose you to high voltages or
other risks.
Environmental
Do not expose to direct sunlight.
We recommend that you do not place the
product on antique/veneered wood to
avoid damage.
Do not stand your product on carpets or
other surfaces which generate fibres, or
place it in locations preventing free flow
of air over its surfaces.
Do not submerge any part of your
product in water and do not use it in damp
or humid conditions, such as in bathrooms.
Do not expose your product to fire,
explosive or other hazardous conditions.
Note
There is a quickdial memory
label on your telephone. Lift the
plastic plate up and you can
write on the label to keep a
record of which memory location
number you have used for each
telephone number.
BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August ’03 ~ 5596 BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August ’03 ~ 5596 BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August ’03 ~ 5596
Note
During all storing operations the
call indicator light will flash.
