Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517
16
To use Write to PIC
This lets you copy the entries from a
Converse 2015 into the PIC.
When the display shows
PROGRAM MODE
(see page 14).
Press and release the Hold button until
the display shows
WRITE TO PIC
.
Press the
Secrecy button. The display
shows
SURE?
(Press the Redial button if you want to
cancel.)
Press the
Secrecy button to transfer
the entries. The display shows
DOWNLOADING
.
Replace the handset when prompted by
the display.
Note
When you transfer the memory, any entries
currently stored in the PIC will be overwritten.
Fast transfer from PIC to phone
Once your PIC contains the entries you want,
it is easy to transfer them to any number of
Converse 2015s.
It takes just 5 seconds to transfer the memory.
If a blank PIC is used by mistake, it will not
affect any current numbers stored on the phone.
To transfer entries
Remove the plastic cover from the
one-touch buttons.
Insert the pre-programmed PIC into
the PIC socket.
Lift the handset. The display shows
UPLOADING
.
When the transfer is finished, display
shows
REPLACE HANDSET AND REMOVE PIC
.
Replace the handset. Remove the PIC
and replace the plastic cover. Your one
touch entries are stored in the M1-M8
buttons.
USING YOUR PIC