650288

BT BT7610 Manual

21
Zoom out
Zoom in
Previous page
1/90
Next page
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
21
When you make a call, the
green In use light on the
base flashes.
Auto end
If auto end is set to On you
can end a call by placing the
handset back in the base If auto
end is set to Off, you’ll need to
press
to end the call.
Auto end On is the default
setting. See page 58.
Auto answer
If auto answer is set to On you
can answer a call by lifting the
handset off the base. If auto
answer is set to Off, you’ll need
to lift the handset off the base
and press
too. Auto answer
On is the default setting.
See page 58.
To switch the handset off
1. Press and hold until the handset turns off.
To switch the handset on
1. Press and hold until the handset turns on.
Make an external call
1. Press .
2. When you hear the dial tone, enter the number.
Preparatory dialling
1. Enter the number first. If you make a mistake select
Clear by pressing the Right option button to delete
the last digit.
2. Press to dial.
End a call
1. Press .
Receive a call
When you receive a call, the phone rings and the
display shows Incoming call and
. If you’ve got a
caller display service, the display shows the caller’s
number if it’s available or the caller’s name if it
matches an entry stored in your contacts list.
1. Press to accept the call.
Using the phone
Call timer
Your handset will automatically
time your outgoing and
incoming calls. The handset
shows the length of time both
during and for a few seconds
after your call.
… 21 …


Need help? Post your question in this forum.

Forumrules
1

Forum

bt-bt7610

Reset search

  • How do l increase the number of times the handset rings before the answer machine is activated. Submitted on 29-6-2023 at 19:47

    Reply Report abuse

  • I have 4 handsets. how do I transfer an incoming call to another handset Submitted on 28-7-2022 at 20:10

    Reply Report abuse

  • Trying to put on new outgoing message but old one keeps coming up. Submitted on 24-9-2020 at 22:41

    Reply Report abuse

  • We have bought a new Nuisance Call Blocker BT7610 to replace an old one.
    How can we transfer the contacts from the old phone to the new one?
    We have many many contacts and can't face typing them all in again. HELP PLEASE!! Submitted on 22-7-2020 at 22:34

    Reply Report abuse

  • We have bought a second BT7610 Nuisance Call Blocker.
    How can we get the contacts from the old BT7610 onto the new one? Submitted on 22-7-2020 at 22:30

    Reply Report abuse

  • How do l tap into a call already picked up n another handset n bt7610 Submitted on 18-5-2020 at 22:07

    Reply Report abuse

  • "This mail box is full" but there aren't any messages on the phone
    Submitted on 12-4-2020 at 20:04

    Reply Report abuse

  • How do i extend the amount of times my answer machine rings before before the answer machine starts on my BT7610. Submitted on 24-3-2020 at 16:59

    Reply Report abuse

  • My new Twin BT7610 one handset has a message no link to base please check base for what? Submitted on 11-2-2020 at 21:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT BT7610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT BT7610 in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT BT7610

BT BT7610 Quick start guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info