539537
45
Zoom out
Zoom in
Previous page
1/56
Next page
44
Rider 60 Users Manual
Troubleshooting
Getting More Information
Go to http://corp.brytonsport.com > Support for more detailed information.
Reset Rider 60
Press and hold the three buttons (p/LAP/q) at the same time until the device restarts.
Sensor Pairing Issues
Heart rate sensor
If no heart rate sensor is detected or the heart rate sensor is inactive, check the following:
1. Please warm up the heart rate monitor for about 5 minutes.
2. While pairing your speed/cadence sensor, please make sure there is no other speed/
cadence sensor with 5m.
3. In cold weather, wear appropriate clothing to keep the heart rate belt warm.
4. Adjust the sensor position to the middle part of the body. The belt should be worn
under the chest and directly on your body. The Bryton logo shown on the sensor should
be facing upward. Tighten the elastic belt rmly so that it will not turn loose during the
exercise.
5. Check your battery status or change a new battery.
Speed/Cadence sensor
If no speed/cadence sensor is detected or the sensor is inactive, check the following:
1. Make sure the speed/cadence sensor is properly installed. Ensure the distance between
the sensor and the magnet is within 3 mm. Refer to Installing the Speed/Cadence Dual
Sensor at page 47 for detailed instructions.
2. Make sure you have pedaled the wheel to active the sensor so that the data can be
transferred onto your Rider 60.
3. Wheel size not set correctly. You can set your wheel size in Settings ( ) > Bike Prole >
Bike 1/Bike 2 > Bike prole > Wheel. Refer to Wheel Size and Circumference at page 51
for more information.
4. Sensor priority issue: By default, your speed source would always come from priority 1
(GPS). It would only switch to priority 2 (Speed Sensor) if GPS signal is lost. Similarity, it
would switch to the next priority if the previous one is not available. If you would like to
do indoor training, please set speed source from Speed Sensor or Dual Sensor based on
the one you would like to record your speed. Refer to Speed Source/Cadence Source at
page 26 for more information.
5. Check your battery status or change a new battery.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bryton Rider 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bryton Rider 60 in the language / languages: English as an attachment in your email.

The manual is 12,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bryton Rider 60

Bryton Rider 60 Quick start guide - English, German, Dutch - 140 pages

Bryton Rider 60 User Manual - Dutch - 56 pages

Bryton Rider 60 Quick start guide - Danish - 140 pages

Bryton Rider 60 User Manual - French - 57 pages

Bryton Rider 60 Quick start guide - French, Italian, Portuguese, Swedish - 140 pages

Bryton Rider 60 User Manual - Spanish - 56 pages

Bryton Rider 60 Quick start guide - Spanish, Norwegian, Finnish - 140 pages

Bryton Rider 60 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info