Manual Bryant T2-PAC Legacy Touch n Go (page 35 of 60) (English)

628147

Zoom out

Zoom in

1/60

OPERATING THE THERMOSTAT

Using emergency heat (heat pump systems only)

Emergency heat is useful when the automatic auxiliary heat system can’t keep up

with demand. (Systems with heat pumps use “auxiliary heat” when it’s too cold

outside for the heat pump to heat the house without help. The display indicator for

this is aux heat on.)

If the heat pump compressor that works with auxiliary heat fails, or if the heat pump

isn’t working at all, you can turn on the emergency heat for that extra help. (You’ll

know there’s a problem if the house can’t seem to get warm when it’s very cold

outside.) You want to avoid using emergency heat, though, because it’s the most

expensive option. And, of course, if you suspect a problem with your heat pump,

call your heating and cooling dealer immediately.

Here’s how to set your thermostat to use emergency heat.

1. Open the door.

2. Press the mode button three times. You will see Em heat in the upper left

of the display.

3. Close the door.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bryant T2-PAC Legacy Touch n Go in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bryant T2-PAC Legacy Touch n Go

Bryant T2-PAC Legacy Touch n Go User Manual - French - 59 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bryant T2-PAC Legacy Touch n Go Manual

Product: