Manual Bryant T2-PAC Legacy Touch n Go (page 18 of 60) (English)

628147

Zoom out

Zoom in

1/60

PROGRAMMING THE THERMOSTAT

Setting the home temperature

1. Open the door.

2. Press the home button located under the display on the

left. You will see a triangle icon (B) above the home but-

ton. This icon will always tell you whether you’re in the

home, away or sleep setting.

3. You will see the heating and cooling temperatures that

were set at the factory. To use these, just close the d oor.

4. To change the factory settings press the home button. You

will see the word heat flashing on the screen.

5. Press the up or down button until you reach the d esired

temperature setting.

6. Press and hold the home button for about three seconds.

The set temperature will flash, indicating that it saved

your settings.

7. To change the cooling temperature setting, press the

mode button repeatedly until you see the word cool flash-

ingonthescreen.

8. Press the up or down button on the right side of the dis-

play until you reach the desired temperature setting.

9. Press and hold the home button for about three seconds. The set temperat-

ure will flash, indicating that it saved your settings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bryant T2-PAC Legacy Touch n Go in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bryant T2-PAC Legacy Touch n Go

Bryant T2-PAC Legacy Touch n Go User Manual - French - 59 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bryant T2-PAC Legacy Touch n Go Manual

Product: