Manual Bryant T2-PAC Legacy Touch n Go (page 13 of 60) (English)

628147

Zoom out

Zoom in

1/60

QUICK START

Changing the temperatur e

There are times when you want to change the temperature.

Here’s how.

1. Open the door.

2. Press the up or down buttons on the right side until you

reach the desired temperature setting. This creates a “tem-

porary hold” until the n ext pre--set time period. You will

see temporary hold on the display. (T o switch from the

cooling temperature to the heating temperature – or vice

versa – press the mode button on the left until the word

heat or cool is flashing.)

3. To maintain that temperature setting so it doesn’t change

during the next pre--set time period, press the hold/run

button on the left side. The display will show hold.The

temperature will stay at the setting you selected until you

release the hold.

4. To return the temperature to the pre--set level for that time

period, press hold/run. This releases the hold and the tem -

perature will return to its programmed level.

5. Close the door.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bryant T2-PAC Legacy Touch n Go in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bryant T2-PAC Legacy Touch n Go

Bryant T2-PAC Legacy Touch n Go User Manual - French - 59 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bryant T2-PAC Legacy Touch n Go Manual

Product: