Manual Bruder Mannesmann 12591 (page 35 of 57) (English, German, Dutch, French, Portuguese, Spanish)

666462

Zoom out

Zoom in

1/57

GB - 35

 Depending on the length of the drill bit, adjusting the depth stop will

allow you to drill a series of holes at a preset depth.

2. Fitting and changing bits (Fig. 2)

 Always unplug your drill from the mains before changing the bit.

 Your drill is equipped with an SDS-plus bushing system.

 Clean the bit shaft from dust and coarse dirt with a dry cloth before

you insert the bit into the bushing. Add a little grease (can supplied)

to the shaft with a clean cloth or brush.

 Pull back the locking sleeve (2) and hold it.

 Turn the dust-free bit into the bushing as far as it will go, and release

the locking sleeve (2). The bit will lock in automatically.

 Give the bit a tug to make sure that it is secure.

 To release the bit, pull back the locking sleeve (2) and pull out the bit.

3. Chiselling (Fig. 3/4)

Switch off your hammer/chisel drill’s turning function before you use

your drill as a chisel.



Turn the turning stop switch (3) with the arrow pointing to the marking

(a) on the machine casing.

 Make sure that the hammer-action stop switch (6) is in position (d).

4. Drilling (Fig. 3/4)

Switch off the hammer-action function to drill into smooth or sensitive

surfaces such as ceramic tiles.

 Turn the hammer-action stop switch (6) with the arrow in position (c)

to switch off the hammer-action function.

 Make sure that the turning stop switch (3) is in position (b).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bruder Mannesmann 12591 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bruder Mannesmann 12591 Manual

Product: