666583
3
Zoom out
Zoom in
Previous page
1/5
Next page
Delta-Sander
item-no. 12370
CE
This tool is interference-suppressed
according to
CE EN 55014 + EN 61000
I N S T R U C T I O N - M A N U A L
Before using electric power-tools, please read and
understand the attached safety-instructions!
The Delta-Sander is used for grinding jobs of different
materials, especially at corners or edges.
Additional safety-hints for Delta-Sanders:
Be sure to wear a dust-mask during all grind-
ing jobs.
Be sure the machine is switched off, before con-
necting to the power-outlet.
Remove all nails, screws or other metal-parts from
the surface of your workpiece, in order to prevent
damages of the sanding-paper or the velcro-plate.
Do not try to work on extremely small workpieces.
Protect your workpiece against slipping. Probably
you have to use clamps, to fix your workpiece.
Do not start sanding, before the machine has
reached its maximum speed.
Do not touch moving parts of the machine by your
hands during your work.
Do not stop the machine by pressing the sanding-
plate, after having switched-off the machine.
Be sure, that the machine has come to a comple-
te stop, before laying-down.
Attention! The Delta-Sander must not be used
for wet grinding jobs!
Discription
6. On-/Off-switch
7. Speed adjustment
8. Sanding-plate with velcro-sheet
9. Sanding paper
10. Adaptor for vacuum-cleaner
Technical dates
Voltage 230 V-/50 Hz
Power consumption 280 W
No-load speed 6.000-9.000 min
-1
Size of sanding paper 90x90x90 mm
Sound pressure level (LPA) 70,5 dB(A)
Sound power level (LWA) 83,5 dB(A)
Vibration 5,8 m/s²
(according to EN 50144/13)
Protection class / II
Be sure to wear dust-mask and ear-protection
during use!
Recommended nominal operating time: approx. 20
minutes under permanent load.
Rest after permanent operation: approx. 5-10 minu-
tes.
Changing the sanding-paper
Do not use damages and worn-out sanding-paper.
Always disconnect the machine from the power-
supply, before changing the sanding-paper.
Remove the worn-out sanding-paper from the
velcro-plate. When mounting a new sanding-
paper, let the holes in the sanding-paper fit with
the holes in the velcro-plate.
Always clean the velcro-plate, when changing the
sanding-paper.
Due to the triangular shape of the sanding-paper
and the construction of the sanding-plate, the
machine is suitable for jobs at hard-to-reach
places, e.g. edges, angles etc., which can only be
reached with the tip or the edge of the sanding-
paper.
Whenever one tip or edge of the sanding-paper is
worn-out, just remove, turn by 120° and fix again
on the velcro-plate, as described above.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bruder Mannesmann 12370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bruder Mannesmann 12370 in the language / languages: English, German as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info