525941
75
Zoom out
Zoom in
Previous page
1/80
Next page
73
4
The upper
thread breaks.
You have not inserted the needle
properly.
Insert the needle properly. page 22
The area around the hole in the nee-
dle plate is scratched.
Replace the needle plate.
Contact your retailer or the nearest
authorized service center.
The area around the hole in the
presser foot is scratched.
Replace the presser foot.
Contact your retailer or the nearest
authorized service center.
The bobbin case is scratched, or has
a burr on it.
Replace the bobbin case.
Contact your retailer or the nearest
authorized service center.
You have not used a bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 12
The lower
thread is tangled
or breaks.
You have not wound the bobbin
thread properly.
Wind the bobbin thread properly. page 12
The bobbin is scratched or does not
turn smoothly.
Replace the bobbin.
The thread is tangled.
Remove the tangled thread and
clean the bobbin case.
page 70
You have not used a bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 12
Bobbin is set incorrectly. Reset the bobbin thread correctly. page 15, 16
The thread is
tangled on the
wrong side of
the fabric.
The upper thread was not threaded
correctly.
Correct the upper threading. page 17
The thread
tension is
incorrect.
You have not threaded the upper
thread properly.
Correct the upper threading. page 17
You have not wound the bobbin
thread properly.
Wind the bobbin thread properly. page 12
You have not threaded the right
combination of thread and needle
for the fabric you are using.
Choose a thread and needle that are
appropriate for the type of fabric.
page 21
You have not attached the presser
foot holder properly.
Attach the presser foot holder
properly.
page 26
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 31
You have not used a bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 12
Bobbin is set incorrectly. Reset the bobbin thread correctly. page 15, 16
The upper
thread is too
tight.
The bobbin thread is incorrectly
installed.
Correctly install the bobbin thread. page 15
The fabric is
wrinkled.
You have not threaded the upper thread
properly or fitted the bobbin properly.
Thread the upper thread and wind
the bobbin thread properly.
page 15, 16, 17
You have not fitted the spool properly. Fit the spool properly.
You have not used the right combina-
tion of fabric, thread and needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 21
The needle is bent or blunt. Replace the needle. page 22
Symptom Possible cause How to put it right Reference
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XR9500PRW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XR9500PRW in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XR9500PRW

Brother XR9500PRW Additional guide - English - 2 pages

Brother XR9500PRW Quick start guide - English - 2 pages

Brother XR9500PRW Additional guide - German - 2 pages

Brother XR9500PRW Quick start guide - German - 2 pages

Brother XR9500PRW Additional guide - Dutch - 2 pages

Brother XR9500PRW Quick start guide - Dutch - 2 pages

Brother XR9500PRW Additional guide - French - 2 pages

Brother XR9500PRW Quick start guide - French - 2 pages

Brother XR9500PRW Additional guide - Italian - 2 pages

Brother XR9500PRW Quick start guide - Italian - 2 pages

Brother XR9500PRW Additional guide - Spanish - 2 pages

Brother XR9500PRW Quick start guide - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info