631404
46
Zoom out
Zoom in
Previous page
1/52
Next page
APPENDIX
45
TROUBLESHOOTING
If the machine stops operating correctly, check the following possible problems before requesting service. You can
solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and
troubleshooting tips. Visit us at “ http://solutions.brother.com
”. If the problem persists, contact your dealer or the
nearest authorized service center.
Symptom Possible cause How to put it right Page
The sewing
machine does
not work.
The main power switch is turned off. Turn on the main power switch. 7
The bobbin winder shaft is pushed to the
right.
Move the bobbin winder shaft to the
left.
14
You have not used the foot controller
properly.
Use the foot controller properly. 7
Fabric being
sewn with the
machine
cannot be
removed.
Thread is tangled below the needle plate.
Lift up the fabric and cut the threads
below it, and clean the race.
43
The needle
breaks.
The needle is incorrectly installed. Correctly install the needle. 7
The needle clamp screw is loose.
Use a disc-shaped screwdriver to firmly
tighten the screw.
8
The needle is bent or blunt. Replace the needle. 7
The upper thread was not threaded
correctly.
Correct the upper threading. 18
You have not used the right combination of
fabric, thread and needle.
Choose a thread and needle that are
appropriate for the type of fabric.
24
The presser foot you are using is not
appropriate for the type of stitch that you
want to sew.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
The upper thread tension is too tight. Loosen the upper thread tension. 29
You are pulling the fabric too much. Lightly guide the fabric.
You have not fitted the spool properly.
Fit the spool properly. 14, 27
The area around the hole in the needle
plate or the presser foot is scratched.
Replace the needle plate.
Contact your retailer or the nearest
authorized service center.
The bobbin case is scratched.
Replace the bobbin case.
Contact your retailer or the nearest
authorized service center.
You have not used a bobbin that has been
designed for this machine.
Use a bobbin that has been designed
for this machine.
13
The upper
thread
breaks.
You have not threaded the upper thread
properly. (For example, you have not fitted
the spool properly, or the thread has come
out of the guide above the needle.)
Correct the upper threading. 18
There are knots or tangles in the thread. Remove any knots or tangles.
The needle is not appropriate for the thread
you are using.
Choose a needle that is appropriate for
the type of stitch.
24
The upper thread tension is too tight. Loosen the upper thread tension. 29
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XR37NT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XR37NT in the language / languages: English as an attachment in your email.

The manual is 18,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info