631404
33
Zoom out
Zoom in
Previous page
1/52
Next page
32
3
Stitch width
0
Lower the presser foot lever.
For details on changing the stitch width, refer
to “Stitch width dial” on page 12.
a
Sew at a slow speed holding the fabric
with your hands, so that the needle
slightly catches the fold of the hem.
b
Remove the basting stitching and turn the
fabric right side up.
Shell tuck stitching
The Shell Tuck Stitch can be used to sew a picot (lace-
like) edge on lightweight fabric.
1
Adjust the thread tension so that it is
tighter than normal.
2
Place the fabric under the presser foot so
that it will be sewn along the bias, with
the straight stitches sewn on the seamline
and the zigzag stitches sewn slightly over
the folded edge.
3
Sew at a slow speed.
1 Straight stitches
2 Zigzag stitches
Elastic stitching
You can use the Elastic Stitch for mending, sewing
elastic or joining fabric. Each is explained below.
Mending
1
Place the reinforcement fabric under the
area you want to mend.
Use the basting pins to hold the
reinforcement fabric.
2
Following the line of the tear, sew using
the Elastic Stitch as shown.
Sewing elastic
1
Pin the elastic tape to the wrong side of
the fabric.
2
As you sew, stretch the elastic in front of
and behind the presser foot.
1 Wrong side of fabric 2 Right side of fabric
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Shell Tuck
Stitch
F-3
(1/64-1/8)
3-6.5
(1/8-1/4)
1 2
5
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Elastic Stitch
F-2.5
(1/64-3/32)
3-6.5
(1/8-1/4)
1
2
6
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XR37NT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XR37NT in the language / languages: English as an attachment in your email.

The manual is 18,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info