Manual Brother XR37NT (page 10 of 52) (English)

631404

Zoom out

Zoom in

1/52

KNOWING YOUR SEWING MACHINE ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

————————————————————————————————————————————————

—————

Lower the presser foot lever and fix the

presser foot onto the shank. If the presser

foot is in the correct place, the bar should

snap in.

1 Shank

2 Bar

■ Presser foot installation orientation

CAUTION

THE CONTROLS

Pattern selection dial

CAUTION

To select a stitch, simply turn the pattern selection dial,

located on the right side of the machine. The pattern

selection dial may be turned in either direction. The

next section shows recommended stitch lengths and

widths.

1 Pattern selection dial

2 Chosen pattern number

Stretch stitching

Raise the needle by turning the handwheel toward you

(counterclockwise) so that the mark on the wheel points

up.

Setting the stitch length dial to “ ” changes the

selected pattern to a stretch stitch.

● If the presser foot is not installed with

the correct orientation, the needle may

strike the presser foot, which may bend

or break the needle and cause injury.

● When you use the pattern selection dial

to choose a pattern, raise the needle by

turning the handwheel toward you

(counterclockwise) so that the mark on

the wheel points up. If the needle is in

the down position when you turn the

pattern selection dial, the needle, presser

foot or fabric may be damaged.

• The pattern number

display does not rotate

endlessly. If you set

the pattern selection

dial to the highest or

lowest pattern and

continue to turn it in

the same direction, the

dial will spin freely but

the pattern will not

change.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XR37NT in the language / languages: English as an attachment in your email.

The manual is 18,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XR37NT Manual

Product: