631397
56
Zoom out
Zoom in
Previous page
1/101
Next page
45
STRAIGHT AND ZIGZAG STITCHING
GERAD- UND ZICKZACKSTICH
НОРМАЛЬНАЯ ПРЯМАЯ И ЗИГЗАГООБРАЗНАЯ СТРОЧКА
Zigzag Stitching
Pattern Stitch Length Stitch Width
(Zigzag Stitch) Fixed 1.5
(Zigzag Stitch) F-4 Fixed 3.5
(Zigzag Stitch) Fixed 5
ZIGZAG STITCH
Select the Zigzag Stitch using the Pattern Selection Dial. Then,
select the Stitch Length.
It is recommended to sew using the Straight Stitch at the beginning
and end of the Zigzag Stitches.
(This acts as a reinforcement stitch.)
SATIN STITCH
When the Zigzag Stitch length is set in the “F” range, it produces a
Satin Stitch (a dense Zigzag Stitch). The Satin Stitch can be used
for making decorative stitches. Select the pattern number accord-
ing to the desired stitch width. Then, set the stitch length in the “F”
range.
When sewing a satin stitch, use a slightly loose upper thread
tension to produce more beautiful stitches.
Зигзагообразный стежок
Стежок
Длина стежка
Ширина стежка
(Зигзагообразный стежок)
Фиксир. 1,5
(Зигзагообразный стежок)
F-4 Фиксир. 3,5
(Зигзагообразный стежок)
Фиксир. 5
ЗИГЗАОГООБРАЗНЫЙ СТЕЖОК
Установите ручку выбора типа стежка на зигзагообразный
стежок. Затем установите длину стежка.
При данной строчке рекомендуется начало и конец шва
выполнять прямым стежком.
(Он служит для усиления шва.)
«САТИНОВЫЙ» СТЕЖОК
При установке длины зигзагообразного стежка в пределах
области с индексом“F”формируется так называемый
«сатиновый» стежок (мелкие зигзагообразные стежки).
Сатиновый стежок может использоваться для декоративной
обработки ткани. Установите ручку выбора типа стежка в
зависимости от требуемой ширины стежка. Затем установите
ручку регулирования длины стежка в пределах области с
индексом“F”.
Для получения красивого шва при прошивании ткани
сатиновым стежком слегка ослабьте натяжение верхней нити.
Zickzackstich
Stichmuster Stichlänge Stichbreite
(Zickzackstich) Fixiert 1,5
(Zickzackstich) F-4 Fixiert 3,5
(Zickzackstich) Fixiert 5
ZICKZACKSTICH
Wählen Sie mit dem Stichmuster-Einstellrad den Zickzackstich. Wählen
Sie dann die Stichlänge.
Jeweils am Anfang und Ende von Zickzacknähten wird (zur Befestigung
und Verstärkung der Naht) der Geradstich empfohlen.
SATIN-STICH
Wenn die Länge des Zickzackstiches im Bereich F eingestellt ist, wird
ein Satin-Stich erzeugt (ein enger Zickzackstich). Der Satin-Stich kann für
dekorative Stiche benutzt werden. Wählen Sie die Nummer des Zickzack-
stiches der gewünschten Breite. Stellen Sie dann die Stichlänge in den
Bereich F.
Verringern Sie beim Nähen eines Satinstiches die Oberfadenspannung
etwas, um ein besseres Nahtbild zu erzielen.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-6040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-6040 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-6040

Brother XL-6040 User Manual - German, Dutch, French - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info