Manual Brother XL-5340 (page 61 of 77) (English, French, Spanish)

579803

Zoom out

Zoom in

1/77

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Darning

Pattern Stitch Length

(Straight Stitch) Any

1. Place the darning plate on the needle plate as shown in fig. A.

1’. Lower the feed dogs by setting the drop feed lever to the up posi-

tion. (When the machine is equipped with a Drop Feed.)

2. Set the pattern selection dial to the Straight Stitch.

3. Place the portion to be darned under the presser foot together with

a fabric underlay for reinforcement.

4. Remove the presser foot and presser foot holder, then lower the

presser foot lifter.

5. Begin sewing alternating between gently drawing the work away

from you and pulling it toward you.

6. Repeat this motion until the portion to be darned is filled with par-

allel lines of stitching. (See fig. B.)

Zurcido

Número de puntada Largo de puntada

(Puntada recta) Cualquiera

1. Coloque la placa de zurcido en la placa de la aguja tal y como se

muestra en la fig. A.

1’. Baje los alimentadores colocando la palanca en la posición ha-

cia arriba. (cuando la máquina está equipada con alimentación

de bajada).

2. Ponga el selector de puntada en puntada recta.

3. Ponga el tejido a zurcir debajo del prensatelas con una pieza de

tela de refuerzo debajo.

4. Retire el prensatelas y su soporte y luego bájelo.

5. Empiece a coser empujando y tirando alternativamente del teji-

do.

6. Repita la operación hasta que el zurcido se haya completado

creando unas cuantas líneas de puntadas paralelas. (Ver fig. B.)

Reprisage

Modèle Longueur de point

(Point droit) N’importe quelle longueur

1. Placer la plaque à repriser sur la plaque à aiguille, comme indiqué sur la

fig. A.

1’. Abaisser les griffes d’entraînement en mettant le levier respectif sur la

position relevée. (Lorsque la machine est équipée d’un levier d’abaisse-

ment des griffes d’entraînement).

2. Mettre le sélecteur de modèle sur le point droit.

3. Placer la partie à repriser et la pièce de renfort sous le pied-de-biche.

4. Retirer le pied-de-biche et son support puis abaisser le releveur de pied-

de-biche.

5. Commencer à coudre en donnant au tissu un mouvement de va-et-vient

(le pousser et le tirer doucement).

6. Répéter le mouvement jusqu’à ce que la partie à repriser soit remplie de

lignes de points parallèles. (Voir fig. B.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5340 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5340 Manual

Product: