579803
58
Zoom out
Zoom in
Previous page
1/77
Next page
50
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
Costura de botones
Número de puntada
Largo de puntada
Ancho ade puntada
Prensatelas
(Puntada zigzag) Cualquiera
Prensatelas
para botones
1. Mida la distancia entre los distintos agujeros del botón y selec-
cione el ancho de la puntada apropiado mediante el selector de
ancho de puntada. Por ejemplo, si la distancia entre los agujeros
es de 1,5 mm (1/16"), ponga el ancho de puntada en “1,5”.
2. Instale el prensatelas para el cosido de botones.
3. Coloque la placa de zurcido en la placa de la aguja.
(Cuando la máquina está equipada con una palanca de alimen-
tación de bajada, baje los ganchos de alimentación colocando la
palanca de alimentación de bajada en la posición hacia arriba).
4. Coloque un botón entre el prensatelas y el tejido, y asegúrese de
que la aguja pase por los agujeros sin picar el botón. Si golpea el
botón véase el 1
er
paso.
5. Cosa unas 10 puntadas a baja velocidad.
6. Retire el tejido de la máquina. Corte los hilos inferior y superior y
haga un nudo con ambos en el revés del tejido.
Pour coudre un bouton
Modèle
Longueur de point
Largeur de point Pied-de-biche
(Point zigzag)
N’importe
Pied pour
quelle largeur
boutons
1. Mesurer la distance entre les orifices et définir la largeur de point appro-
priée à l’aide du sélecteur de largeur de point. Par exemple, si la dis-
tance entre les orifices est de 1,5 mm, régler la largeur de point sur 1,5.
2. Installer le pied pour boutons.
3. Placer la plaque à repriser sur la plaque à aiguille.
(Lorsque la machine est équipée d'un levier d'abaissement des griffes
d'entraînement, abaisser les griffes en relevant le levier).
4. Placer un bouton entre le pied et le tissu et veiller à ce que l’aiguille
pique dans les trous sans heurter le bouton. Si elle heurte le bouton,
veuillez vous reporter au point 1.
5. Coudre environ 10 points à faible vitesse.
6. Retirer le tissu de la machine. Couper les fils inférieur et supérieur puis
les nouer sur l’envers du tissu.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5340 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info