579803

Brother XL-5340 Manual

52
Zoom out
Zoom in
Previous page
1/77
Next page
44
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
C
A
C
A
C
A
Making a Buttonhole
(4 Step Buttonhole)
Pattern Stitch Length Stitch Width Foot
-1.5 Fixed 5
NOTE:
1. It is recommended to practice making a buttonhole on a scrap piece
of fabric before attempting it on the actual garment.
2. When sewing buttonholes on thin fabrics, place stabilizer material
on the underside of the fabric.
Buttonhole-making is a simple process that provides reliable results.
Making a Buttonhole
1. Using tailor’s chalk, mark the position and length of the buttonhole
on the fabric.
2. Attach the buttonhole foot, then slide the outside frame of the but-
tonhole foot as far back as possible.
3. The front bar tack will be sewn first. Place the fabric under the
presser foot so that the center of the front bar tack mark is directly
under the center of the presser foot and aligned with the two red
lines as shown.
1 Front of chalk mark
1
Para coser ojales
(Cosido de ojales con 4 operaciones)
Número de puntada
Largo de puntada Ancho de puntada
Prensatelas
-1,5 Fija 5
NOTA:
1. Le recomendamos hacer una prueba de costura de ojales en un
pedazo de tela antes de empezar a hacerla en el tejido del traba-
jo.
2. Para hacer ojales en materiales finos, coloque un material esta-
bilizador debajo del tejido.
La función de costura de ojales es un proceso simple que ofre-
ce increíbles resultados.
Cosido del ojal
1. Con jaboncillo, marque la posición del ojal en el tejido.
2. Instale el prensatelas para ojales y luego deslice suavemente la
estructura exterior del prensatelas para ojales tan lejos como le
sea posible.
3. Se va a coser primero el remate de la parte delantera del ojal.
Coloque el tejido debajo del prensatelas para que el centro de la
marca del remate de la parte delantera esté directamente debajo
del centro del prensatelas y se alinee con las dos líneas rojas
como se muestra.
1 Marca del remate de la parte delantera.
Pour faire une boutonnière
(Boutonnière automatique 4 pas)
Modèle
Longueur de point
Largeur de point
Pied-de-biche
-1,5 Fixe 5
REMARQUE:
1. Il est vivement conseillé de s’entraîner au préalable sur une chute de
tissu avant de couche la boutonnière sur le tissu souhaité.
2. Lors de la réalisation de boutonnières sur des tissus doux et légers, pla-
cer une pièce de renfort à l’envers du tissu.
Facile à réaliser, la couture automatique de boutonnières à la machine
donne des résultats très fiables.
Pour faire une boutonnière
1. A l’aide d’une craie de tailleur, marquer sur le tissu l’emplacement et la
longueur désirée de la boutonnière.
2. Installer le pied pour boutonnières et pousser le cadre extérieur du pied
à fond vers l’arrière.
3. La partie avant de la bride d’arrêt doit être cousue en premier. Placer le
tissu sous le pied-de-biche de telle manière que le milieu de la bride
d’arrêt se trouve au centre du pied-de- biche, aligné avec les deux mar-
ques rouges, comme indiqué.
1 Partie avant de la marque à la craie
Buttonhole
Foot
(4 Step
Buttonhole)
Prensatelas
para ojales
Pied pour
boutonnières
(Cosido de
ojales con 4
operacio-
nes)
(Bouton-
nière
automati-
que 4 pas)
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5340 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info