579803
43
Zoom out
Zoom in
Previous page
1/77
Next page
35
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
A
B
C
D
Blindhem Stitching
Pattern Stitch Length Stitch Width
(Blindhem Stitch) -2 Fixed 5
(Stretch Blindhem Stitch) -1.5 Fixed 3.5
The Blindhem Stitch is used to finish the edge of a project, like the
bottom of a pair of pants, so that the stitch does not show. Use the
Blindhem Stitch when sewing on non-stretch fabrics, and the Stretch
Blindhem Stitch for stretch fabrics.
1. Both the upper (spool) and lower (bobbin) threads should be the
same color as the fabric.
2. Fold back the fabric to the desired location of the hem as shown in
fig. A. Then, fold the edge of the fabric as in fig. B. Leave a 6 mm
(1/4") overlap at the edge.
3. Set the pattern selection dial to either the Blindhem Stitch or Stretch
Blindhem Stitch and set the stitch length.
4. Sew on the fold as in fig. C.
5. When the fabric is unfolded you will have a blind hem. (See fig.
D.)
NOTE:
The Stretch Blind Stitch is useful for stretch fabrics.
Puntadas invisibles
Número de puntada
Largo de puntada
Ancho de puntada
(Puntada invisible) -2 Fija 5
(
Basta invisible stretch
) -1,5 Fija 3,5
La puntada invisible se usa para terminar la orilla de una confección,
tal como el borde inferior de unos pantalones, sin que se vean las
puntadas. Utilice la puntada invisible cuando vaya a coser un tejido
que no se estire y la Puntada pespunto invisible para los tejidos elás-
ticos.
1. Ambas bobinas de hilo, superior e inferior, deben ser del mismo
color que el tejido.
2. Doble el tejido según la orilla que desee coser tal y como se
muestra en la fig. A. Luego, dé vuelta al tejido tal y como se
indica en la fig. B. Deje unos 6 mm(1/4") sin coser para cubrir la
costura.
3. Ponga el selector de puntadas en la puntada invisible o en la
Puntada pespunto invisible y ajuste el largo de puntada.
4. Cosa en el pliegue tal como se muestra en la fig. C.
5. Al desdoblar el tejido, tendrá un dobladillo con puntada invisible.
(Ver fig. D.)
NOTA:
La pespunto invisible se recomienda para tejidos elásticos.
Ourlet invisible de lingerie
Modèle
Longueur de point
Largeur de point
(
Ourlet invisible de lingerie
) -2 Fixe 5
(
Ourlet
invisible élastique) -1,5 Fixe 3,5
L’ourlet invisible de lingerie sert à terminer le bord d’un ouvrage, comme
par exemple l’ourlet d’un pantalon, sans que les points n’apparaissent. Uti-
liser l’ourlet invisible de lingerie pour tout tissu non extensible et le l’point
élastique invisible pour les tissus extensibles.
1. Le fil supérieur (bobine) et le fil inférieur (canette) doivent être de la
même couleur que le tissu.
2. Plier le tissu à la taille souhaitée pour l’ourlet, (comme le montre la fig.
A) puis replier le bord en faisant chevaucher de 6 mm (voir fig. B.)
3. Mettre le sélecteur de modèle de point sur “ourlet invisible de lingerie”
ou sur “point élastique invisible” et régler la longueur du point.
4. Coudre sur le repli (comme le montre la fig. C.).
5. Lorsque le tissu est déplié, on obtient un ourlet invisible. (Voir fig. D.)
REMARQUE:
Utiliser l’point élastique invisible pour coudre des tissus élastiques.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5340 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info