631396
37
Zoom out
Zoom in
Previous page
1/45
Next page
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————
36
Appliqués
You can create an applique by cutting a different piece
of fabric into a shape and using it as a decoration.
1
Baste the cutout to the fabric at the desired
location.
2
Carefully sew around the edge of the cutout
using a Zigzag Stitch with a fine stitch length.
3
Cut away any fabric that is left outside the
stitching.
4
Remove the basting, if necessary.
Memo
Make reinforcing straight stitches at the
beginning and the end of the stitching to secure
it.
Monogramming and
Embroidering
Preparing for sewing a Monogram and
Embroidering
1
Place the darning plate on the needle plate.
(On a machine equipped with a drop feed
lever, lower the feed dogs by setting the drop
feed lever to the up position.)
2
Set the pattern selection dial to the Zigzag
Stitch.
3
Draw the lettering (for monogramming) or
design (for embroidering) on the surface of
the fabric.
4
Stretch the fabric between embroidery hoops
as firmly as possible, with the underside of the
fabric on the bottom of the inside hoop.
5
Put the work under the needle with the
presser foot holder assembly removed.
Stitch Name Pattern
Stitch Length
[mm (inch)]
Stitch Width
[mm (inch)]
Zigzag Stitch
-2
(1/64-1/16)
1.7
(1/16)
Zigzag Stitch
-2
(1/64-1/16)
3.5
(1/8)
Zigzag Stitch
-2
(1/64-1/16)
5
(3/16)
Be careful that the needle does not hit a
pin during sewing, as the needle can
break. You may also be injured.
Stitch
Name
Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Foot
Zigzag
Stitch
Any
1.7
(1/16)
None
Zigzag
Stitch
Any
3.5
(1/8)
Zigzag
Stitch
Any
5
(3/16)
CAUTION
XL5000us.book Page 36 Tuesday, November 11, 2003 9:25 AM
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5070 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5070

Brother XL-5070 User Manual - German - 45 pages

Brother XL-5070 User Manual - Dutch - 45 pages

Brother XL-5070 User Manual - French - 45 pages

Brother XL-5070 User Manual - Spanish - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info