631394
15
Zoom out
Zoom in
Previous page
1/45
Next page
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————
14
Stitch Length Dial
Depending on the selected stitch, you may need to
adjust the stitch length for best results. The numbers
marked on the stitch length dial represent the stitch
length in millimeters (mm) (1/25").
THE HIGHER THE NUMBER, THE LONGER THE
STITCH. With the “0” setting material is not fed. This
is used when sewing on a button.
The “ ” range is for making a satin stitch (close zigzag
stitch), which is used for making buttonholes and
decorative stitches. The position needed for making the
satin stitch varies according to the material and thread
being used. To determine the exact dial position, first
test the stitch and length settings on a scrap piece of
fabric to observe the feeding of the material.
1 Stitch length dial
2 Longer
3 Shorter
Stretch Stitching
Selecting a stretch stitch
Setting the stitch length dial to “ ” changes the
selected pattern to a stretch stitch.
Adjusting the stretch stitching
The machine is adjusted at the factory so that the
stretch stitching can be sewn with the stitch
length dial set to “ ” (standard position).
If different types of fabric or thread are used or the
pattern does not have the correct shape, turn the
dial toward either “+” or “-” to adjust the stitch.
1 Makes fine stitches
2 Standard position
3 Makes rough stitches
Note
The dial cannot be turned past “· · · · + -”.
Do not forcefully turn the stitch length dial
out of the allowable range.
.
Reverse Sewing Lever
You can use reverse sewing for backtacking and
reinforcing seams.
To sew in reverse, push the reverse sewing lever in
as far as possible and hold it in that position while
you lightly push the foot controller. To sew forward,
release the reverse sewing lever. The machine will
then sew forward.
Drop Feed Lever (if the machine is
equipped with a drop feed lever)
Use the drop feed lever to raise or lower the feed
dogs according to the job that is being done. When
monogramming, embroidering, darning or sewing on
buttons, the feed dogs should be lowered so that the
garment will not be fed.
1 Drop feed lever
2 Up position: Feed dogs are down.
3 Down position: Feed dogs are up.
If the stitches are bunched together,
lengthen the stitch length and continue
sewing. Do not continue sewing without
lengthening the stitch length, otherwise
the needle may break and cause injury.
1
1
23
2
0
1
CAUTION
SS
SS
SS
+
4
3
2
3
1
SS
SS
1
2
3
XL5000us.book Page 14 Tuesday, November 11, 2003 9:25 AM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5050 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5050

Brother XL-5050 User Manual - German - 45 pages

Brother XL-5050 User Manual - Dutch - 45 pages

Brother XL-5050 User Manual - French - 45 pages

Brother XL-5050 User Manual - Spanish - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info