Manual Brother XL-5030 (page 57 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Making a Buttonhole

(XL5010 only)

XL5010 Pattern Stitch Length Stitch Width Foot

1(A-B-C-D)

Buttonhole -1.5 Fixed 5

Buttonhole Foot

NOTE:

1. It is recommended to practice making a buttonhole on a scrap piece

of fabric before attempting it on the actual garment.

2. When sewing buttonholes on thin fabrics, place stabilizer material

on the underside of the fabric.

Buttonhole-making is a simple process that provides reliable results.

Making a Buttonhole

1. Using tailor’s chalk, mark the position and length of the buttonhole

on the fabric.

2. Attach the buttonhole foot, then slide the outside frame of the but-

tonhole foot as far back as possible.

3. The front bar tack will be sewn first. Place the fabric under the

presser foot so that the center of the front bar tack mark is directly

under the center of the presser foot and aligned with the two red

lines as shown.

1 Front of chalk mark

Para coser ojales

(Solo XL5010)

XL5010 Número de puntada

Largo de puntada Ancho de puntada

Prensatelas

1(A-B-C-D)

Ojal -1,5 Fija 5

Prensatelas

para ojales

NOTA:

1. Le recomendamos hacer una prueba de costura de ojales en un

pedazo de tela antes de empezar a hacerla en el tejido del traba-

jo.

2. Para hacer ojales en materiales finos, coloque un material esta-

bilizador debajo del tejido.

La función de costura de ojales es un proceso simple que ofre-

ce increíbles resultados.

Cosido del ojal

1. Con jaboncillo, marque la posición del ojal en el tejido.

2. Instale el prensatelas para ojales y luego deslice suavemente la

estructura exterior del prensatelas para ojales tan lejos como le

sea posible.

3. Se va a coser primero el remate de la parte delantera del ojal.

Coloque el tejido debajo del prensatelas para que el centro de la

marca del remate de la parte delantera esté directamente debajo

del centro del prensatelas y se alinee con las dos líneas rojas

como se muestra.

1 Marca del remate de la parte delantera.

Esecuzione di asole

(solo mod. XL5010)

XL5010 Punto Lunghezza Ampiezza Piedino

1(A-B-C-D)

Asola -1,5 Fissa 5

Piedino

per asole

NOTA:

1. Si consiglia esercitarsi nella cucitura delle asole su un campione di stof-

fa prima di realizzarle sull’indumento vero e proprio.

2. Quando si eseguono asole su tessuti sottili, applicare una tela di rinfor-

zo sotto il tessuto.

Il procedimento per eseguire asole è semplice e garantisce ottimi risul-

tati.

Esecuzione di un’asola

1. Marcare con un gessetto per sarti la posizione dell’asola sul tessuto.

2. Applicare il piedino per asole e spingere indietro più a fondo possibile il

telaietto esterno del piedino.

3. La macchina eseguirà per prima la barretta frontale. Collocare il tessuto

sotto il piedino per asole in modo che il centro del segno della barretta

frontale si trovi direttamente sotto il centro del piedino e sia allineato

rispetto alle due linee rosse come mostrato.

1 Lato frontale del segno di gesso

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: