Manual Brother XL-5030 (page 52 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Overedge Stitching

XL5030 XL5020 XL5010

Pattern Stitch Length Stitch Width

17 15 – Stretch Overlock Stitch Fixed 3

18 16 16 Elastic Overlock Stitch Fixed 2.5

20 – 15 Arrow Head Stitch

These stitches are used to join together seams and finish them in one

step. The Elastic Overlock is useful when sewing stretch materials, while

the Arrow head Stitch is ideal for sewing the edge of a blanket.

1. Set the pattern selection dial to the Elastic Overlock, Stretch

Overlock or Arrow Head.

2. Position the fabric under the presser foot so that the seamline is

approximately 3 mm (1/8") to the left of the presser foot center. This

stitch works best with a seam allowance of approximately 6 mm

(1/4") as this allows the right side of the stitch to overlock the cut

edge of the fabric as shown in fig. A.

3. If the seam allowance is wider than the stitch pattern, trim away

any excess fabric after stitching.

A finished Elastic Overlock is shown in fig. B.

Fixed 5

Puntada por encima de la orilla

XL5030 XL5020 XL5010

Número de puntada

Largo de puntada

Ancho de puntada

17 15 –

Puntada overlock

Fija 3

18 16 16

Puntada overlock elástica

Fija 2,5

20 – 15

Puntada

punta de flecha

Estas puntadas se usan para juntar costuras y acabarlas en una

sola operación. La puntada overlock elástica se utiliza en costuras

de tejidos elásticos, mientras que la puntada punta de flecha resulta

ideal para la costura de dobladillos de mantas.

1. Ponga el selector de puntadas en puntada overlock elástica,

pespunto overlock o puntada punta de flecha.

2. Coloque el tejido debajo del prensatelas para que la línea de

costura quede unos 3 mm (1/8") a la izquierda del centro del

prensatelas. Esta puntada da los mejores resultados con una to-

lerancia de costura de unos 6 mm (1/4") dado que así permite a

la parte derecha de la puntada enganchar la orilla cortada del

tejido tal y como se muestra en la fig. A.

3. Si la tolerancia de costura es más ancha que la puntada, corte

cualquier pedazo de tejido que sobre después de coser.

En la fig. B puede ver una puntada overlock elástica.

Fija 5

Rifinitura a sopraggitto

XL5030 XL5020 XL5010

Punto Lunghezza Ampiezza

17 15 – Punto sopraggitto stretch Fissa 3

18 16 16 Punto sopraggitto elastico Fissa 2,5

20 – 15 Punto a freccia

Questi punti consentono di ottenere cuciture elastiche e contemporanea-

mente già rifinite con una sola operazione. Il sopraggitto elastico è utile per

cucire tessuti elastici, mentre il punto a freccia è ideale per cucire il bordo di

coperte.

1. Disporre il selettore dei punti sul sopraggitto elastico, sul sopraggitto

stretch o sul punto a freccia.

2. Stendere il tessuto sotto il piedino premistoffa in modo che la linea della

cucitura si trovi a circa 3 mm a sinistra dal centro del piedino. La distan-

za dal margine ottimale per eseguire questo punto è di circa

6 mm, che consente al lato destro del punto di sopraggittare adeguata-

mente il margine del tessuto, come mostrato in fig. A.

3. Nel caso la distanza dal margine sia più ampia dell’ampiezza del punto,

ritagliare il tessuto in eccesso al termine della cucitura.

La fig. B mostra una rifinitura eseguita con il sopraggitto elastico.

Fissa 5

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: