Manual Brother XL-5030 (page 16 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Changing the Presser Foot

It may be necessary to change the presser foot according to your sew-

ing needs.

SNAP-ON TYPE

Turn power switch to “O”.

1. Raise the needle to its highest position by turning the balance wheel

toward you (counterclockwise) and raise the presser foot lever.

2. Release the foot by raising the lever located at the back of the presser

foot holder assembly.

3. Place a different presser foot on the needle plate so that the bar on

the presser foot is in line with the slot in the presser foot holder.

4. Lower the presser foot lifter and fix the presser foot onto the holder.

If the presser foot is in the correct location, the bar should snap into

place.

Cambio del prensatelas

Según sus necesidades de costura, puede ser necesario cambiar el

prensatelas.

Modelo a presión

Desenchufar la máquina, interruptor principale a “O”.

1. Levante la aguja a su posición más alta, girando la ruedecilla

hacia usted (en el sentido contrario al de las manecillas de un

reloj) y levante la palanca del prensatelas.

2. Suelte el prensatelas levantando la palanca que hay en la parte

trasera del soporte.

3. Coloque otro prensatelas en la placa de agujas de tal forma que

la barra del prensatelas quede alineada con la ranura del soporte

del prensatelas.

4. Baje la palanca del prensatelas y fije el prensatelas en el sopor-

te. Si el prensatelas está bien colocado, la barra debe engan-

charse en su lugar correspondiente.

Sostituzione del piedino premistoffa

In base alle esigenze del lavoro da eseguire, può rendersi necessario sostitu-

ire il piedino premistoffa.

Piedino con innesto automatico

Mettere l’interruttore principale su “O”.

1. Far salire l’ago fino alla sua posizione più alta girando il volantino ver-

so se stessi (in senso antiorario) e sollevare la leva del piedino premistoffa.

2. Staccare il piedino premendo la levetta situata dietro al gruppo supporto

del piedino premistoffa.

3. Collocare il nuovo piedino premistoffa sulla placca dell’ago in modo

che il perno del piedino sia allineato alla scanalatura sul supporto del

piedino premistoffa.

4. Abbassare la leva del piedino premistoffa ed innestare il piedino nel

supporto. Se il piedino è applicato nella posizione corretta, il perno scat-

terà in posizione.

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: