631387

Brother XL-5020 Manual

48
Zoom out
Zoom in
Previous page
1/82
Next page
40
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
A
B
C
D
Blind Hem Stitching
XL5030 XL5020 XL5010
Pattern Stitch Length Stitch Width
7 7 – Blind Hem Stitch -2 Fixed 5
10 – 7 Stretch Blind Stitch
-1.5 Fixed 3.5
The Blind Hem Stitch is used to finish the edge of a project, like the
bottom of a pair of pants, so that the stitch does not show. Use the
Blind Hem Stitch when sewing on non-stretch fabrics, and the Stretch
Blind Stitch for stretch fabrics.
1. Both the upper (spool) and lower (bobbin) threads should be the
same color as the fabric.
2. Fold back the fabric to the desired location of the hem as shown in
fig. A. Then, fold the edge of the fabric as in fig. B. Leave a 6 mm
(1/4") overlap at the edge.
3. Set the pattern selection dial to either the Blind Hem Stitch or Stretch
Blind Stitch and set the stitch length.
4. Sew on the fold as in fig. C.
5. When the fabric is unfolded you will have a blind hem. (See fig.
D.)
NOTE:
The Stretch Blind Stitch is useful for stretch fabrics.
Puntadas invisibles
XL5030 XL5020 XL5010
Número de puntada
Largo de puntada
Ancho de puntada
7 7 – Puntada invisible -2 Fija 5
10 – 7 Pespunto invisible
-1,5 Fija 3,5
La puntada invisible se usa para terminar la orilla de una confección,
tal como el borde inferior de unos pantalones, sin que se vean las
puntadas. Utilice la puntada invisible cuando vaya a coser un tejido
que no se estire y la pespunto invisible para los tejidos elásticos.
1. Ambas bobinas de hilo, superior e inferior, deben ser del mismo
color que el tejido.
2. Doble el tejido según la orilla que desee coser tal y como se
muestra en la fig. A. Luego, dé vuelta al tejido tal y como se
indica en la fig. B. Deje unos 6 mm(1/4") sin coser para cubrir la
costura.
3. Ponga el selector de puntadas en la puntada invisible o en la
pespunto invisible y ajuste el largo de puntada.
4. Cosa en el pliegue tal como se muestra en la fig. C.
5. Al desdoblar el tejido, tendrá un dobladillo con puntada invisible.
(Ver fig. D.)
NOTA:
La pespunto invisible se recomienda para tejidos elásticos.
Orli a punto invisibile
XL5030 XL5020 XL5010
Punto Lunghezza Ampiezza
7 7 – Punto orlo invisibile -2 Fissa 5
10 – 7 Punto stretch invisibile
-1,5 Fissa 3,5
Il punto orlo invisibile permette di rifinire gli orli di indumenti, come ad
esempio il fondo di un paio di pantaloni, in modo che la cucitura non sia
visibile. Utilizzare il punto orlo invisibile per eseguire orli su tessuti non
elastici e il punto stretch invisibile su tessuti elastici.
1. Sia il filo superiore (rocchetto) che quello inferiore (spoletta) devono
essere dello stesso colore del tessuto.
2. Ripiegare in sotto il tessuto formando un orlo dell’altezza desiderata
come mostrato in fig. A. Quindi, piegare l’orlo come mostrato in fig. B,
formando una piega di 6 mm sull’orlo.
3. Disporre il selettore dei punti sul punto orlo invisibile od punto stretch
invisibile ed impostare la lunghezza del punto.
4. Cucire sulla piega come illustrato in fig. C.
5. Stendendo il tessuto si otterrà un orlo a punto invisibile. (Vedi fig. D.)
NOTA:
Il punto stretch invisibile è utile per cucire su tessuti elastici.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5020 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5020

Brother XL-5020 User Manual - German, Dutch, French - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info