631319
20
Zoom out
Zoom in
Previous page
1/45
Next page
19
6
Bring the thread down and pass it behind the
thread guide.
1 Thread guide
7
Thread the needle from front to back and pull
out about 5 cm (2") of thread.
1 5cm (2inch)
Note
If the thread take-up lever is lowered, the
upper thread cannot be wrapped around the
thread take-up lever. Make sure you raise
the presser foot lever and the thread take-up
before you feed the upper thread.
If you incorrectly feed the thread you may
cause sewing problems.
Using the Needle Threader (models
equipped with a needle threader)
Set the main power switch to “O”.
1
Lower the presser foot lever.
2
Turn the balance wheel toward you
(counterclockwise) until the bottom of the
needle holder aligns with the bottom of the
needle-threading-hook holder.
1 Needle holder
2 Needle threader lever
3 Hook holder
4 Align
Note
When you use the needle threader, make
sure to align the bottom of the needle
holder with the bottom of the holder for the
needle-threading hook before lowering the
needle threader lever, otherwise the hook
may be damaged.
3
While lowering the needle threader lever,
hook the thread onto the guide.
1 Needle holder
2 Needle threader lever
3 Guide
4
Pull down the needle threader lever as much
as possible, and then turn the lever toward the
back of the machine (away from you). Make
sure that the hook passes through the eye of
the needle and grabs the thread.
• Hold the thread in front of the needle to
make sure that the hook grabs it.
1
1
4
3
2
1
2
3
1
XL5000us.book Page 19 Tuesday, November 11, 2003 9:25 AM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5000 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5000

Brother XL-5000 User Manual - German - 45 pages

Brother XL-5000 User Manual - Dutch - 45 pages

Brother XL-5000 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info