631319
17
Zoom out
Zoom in
Previous page
1/45
Next page
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————
16
Lower Threading
1
Raise the needle to its highest position by turning
the balance wheel toward you (counterclockwise)
and raise the presser foot lever.
2
Open the shuttle cover behind the extension
table on the front of the machine and pull the
bobbin case out of the shuttle race by pulling
the latch toward you.
1 Bobbin case latch
2 Bobbin case finger
Make sure you follow the instructions
carefully. If you do not cut the thread
completely, and the bobbin is wound,
when the thread runs low it may tangle
around the bobbin and cause the needle
to break.
Setting the bobbin improperly may cause
the thread tension to loosen, and may
break the needle.
1 Wound evenly
2 Wound poorly
CAUTION
CAUTION
1
2
Setting the bobbin improperly may cause
the thread tension to loosen, breaking the
needle and resulting in injury.
1 Wound evenly
2 Wound poorly
The bobbin was designed specifically for
this sewing machine. If bobbins from older
models are used, the machine will not
operate correctly. Use only the enclosed
bobbin or bobbins of the same type
(part code: SA156, SFB (XA5539-151)).
Make sure you turn the power off while
threading the machine. If you
accidentally step on the foot controller
and the machine starts to work, you
could be injured.
CAUTION
1
2
Actual size
11.5 mm
(7/16")
CAUTION
1
2
XL5000us.book Page 16 Tuesday, November 11, 2003 9:25 AM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5000 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5000

Brother XL-5000 User Manual - German - 45 pages

Brother XL-5000 User Manual - Dutch - 45 pages

Brother XL-5000 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info