463670
30
Zoom out
Zoom in
Previous page
1/52
Next page
STRAIGHT AND ZIGZAG STITCHING
————————————————————————————————————————
28
Changing Sewing Direction
1
Stop the machine at the point where you want
to change direction with the needle still in the
fabric.
2
Raise the presser foot and turn the fabric to its
new direction using the needle as a pivot.
3
Lower the presser foot and start sewing in the
new direction.
Finishing Sewing
You can use stitching to lock the threads at the
end of the seam or to strengthen a stitch.
1
Stitch to the end of the seam and stop.
2
Push the reverse sewing lever and stitch
backwards for 1 cm (3/8 inch) from the end of
the fabric.
Removing the Material from the Machine
1
Stop the machine.
Raise the needle to its highest position and
make sure that the thread take-up lever is also
in its highest position.
2
Lift the presser foot, raise the needle to its
highest position, and then pull the fabric out
gently to the left hand side.
Raise the needle to its highest position and
make sure that the thread take-up lever is
also in its highest position.
3
Cut both threads with the thread cutter on the
left hand side of the machine
.
1 Thread cutter
4
To prepare the machine for the next seam,
pull about 10 cm (4 inch) of thread through
the toes of the presser foot toward the back of
the machine.
Top Stitching and Stretch Materials
You can use a straight stitch for top stitching and
sewing lightweight fabrics.
You can use a triple stretch stitch for sewing
stretch fabrics.
Zigzag Stitching
Zigzag Stitch
Turn the pattern selection dial to the Zigzag
Stitch, and then start sewing.
We recommend that you sew using the Straight
Stitch at the beginning and end of zigzag stitches.
(This acts as a reinforcement stitch.)
Satin Stitch
Setting the Zigzag Stitch length in the “F” range
produces a satin stitch (close zigzag stitch). The
Satin Stitch can be used for making buttonholes
and decorative stitches. Set the pattern selection
dial to the Zigzag Stitch, set the stitch length in
the “F” range, and set the stitch width dial
between 0 and 5.
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Zigzag Stitch
F-4
(1/64-3/16)
0-5
(0-3/16)
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-3600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-3600 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-3600

Brother XL-3600 User Manual - German - 51 pages

Brother XL-3600 User Manual - Dutch - 51 pages

Brother XL-3600 User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info