463664
26
Zoom out
Zoom in
Previous page
1/52
Next page
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————
24
Drawing up the Lower Thread
1
While lightly holding the end of the upper
thread, slowly turn the handwheel toward you
(counterclockwise) by hand to lower and then
raise the needle.
2
Pull on the upper thread to draw up the lower
thread.
3
Pull out about 10 cm (4 inch) of both threads
and put them toward the back of the machine
under the presser foot.
1 Upper thread
2 Lower thread
Quick-set Bobbin Threading
This is only available on certain models.
You can begin sewing immediately without
drawing up the bobbin thread. When sewing
gathers or darts, you can draw up the lower
thread by hand so that some thread will be left
over. Before you draw up the lower thread, put
the bobbin back in.
1
Pass the thread along the slit in the direction
of the arrow, and leave it there without
cutting it.
The bobbin cover should still be removed.
2
Draw up the lower thread as described in the
previous steps 1 to 3.
3
Replace the bobbin cover.
Sewing with a Twin Needle
We have designed your machine so you can sew
with this needle and two top threads. You can use
the same color or two different colors of thread for
making decorative stitches.
1
2
Use only twin needles that have been
made for this machine (part code:
X57521-021). Other needles could break
and damage the machine.
When using the twin needle, make sure
the stitch width is not set above 3 since
this may cause the needle to hit the
needle plate and break.
Make sure that the needle does not strike
the presser foot.
Do not sew with bent needles. The
needle could break and injure you.
When using the twin needle, make sure
you use the zigzag presser foot only.
CAUTION
XL2600.book Page 24 Thursday, November 4, 2004 9:46 PM
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-2600 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-2600

Brother XL-2600 User Manual - German - 51 pages

Brother XL-2600 User Manual - Dutch - 51 pages

Brother XL-2600 User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info