631382
38
Zoom out
Zoom in
Previous page
1/63
Next page
37
3
Joining Fabric
You can use the elastic stitch to join two pieces of
fabric together and it is very effective when
sewing knitted fabrics. If you are using nylon
thread, the stitch will not be visible.
1
Put the edge of the two pieces of fabric
together and center them under the presser
foot.
2
Sew them together using the Elastic stitch.
Make sure you keep the two fabric edges close
together.
Overedge Stitching
You can use this stitch to join together seams and
finish them in one operation. It is also useful for
sewing stretch materials.
1
Set the Pattern Selection Dial to the Elastic
Overlock Stitch.
2
Put the fabric under the presser foot so that
the seamline (or arrowhead point) is
approximately 3 mm (1/8 inch) to the left of
the center of the presser foot. This stitch
works best with a seam allowance of
approximately 5 mm (3/16 inch) as this allows
the right (zigzag) side of the stitch to overlock
the cut edge of the fabric.
3
If the seam allowance is wider than the stitch
pattern, trim away any excess fabric after
stitching.
A finished Elastic Overlock Stitch is shown in the
diagram below.
Stitch Name Pattern
Stitch
Length
[mm (inch.)]
Stitch
Width
[mm (inch.)]
Elastic
Overlock
Stitch
2.5 (3/32) 5.0 (3/16)
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-2130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-2130 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-2130

Brother XL-2130 User Manual - German - 63 pages

Brother XL-2130 User Manual - Dutch - 63 pages

Brother XL-2130 User Manual - French - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info