631382
33
Zoom out
Zoom in
Previous page
1/63
Next page
STRAIGHT AND ZIGZAG STITCHING
————————————————————————————————————————
32
Please Read Before Sewing
Straight Stitching
Starting Sewing
1
Turn the Pattern Selection Dial to choose the
stitch number you want. You also need to set
the Pattern Selection Dial to Straight Stitch or
Triple stretch stitch.
2
Raise the needle to its highest position and lift
the presser foot lever.
3
Pull the upper thread though the toes of the
presser foot.
4
Put the fabric under the presser foot and
position the needle 1 cm (3/8 inch) from the
edge of the fabric.
5
Lower the presser foot.
6
To back tack, push down the Reverse Sewing
Lever as far as possible, and then press the
foot controller to start reverse sewing. Release
the foot controller to stop sewing.
7
Release the Reverse Sewing Lever and start
sewing in the forward direction by pressing
the foot controller.
You can use reverse sewing for locking the
end of seams and where you need to
strengthen a stitch.
To avoid being injured, watch the needle carefully while you are using the machine. Keep
your hands away from moving parts.
Do not stretch or pull the fabric during sewing. If you do, the needle may be damaged and
you may be injured.
Do not use bent or broken needles. If you do, you may be injured.
Take care that the needle does not hit basting pins or other objects during sewing. The needle
may break and you may be injured.
Always use the correct presser foot. If you use the wrong presser, the needle may hit the
presser foot and bend or break and you may also be injured.
When you turn the balance wheel by hand, always turn it toward the front of the machine
(counterclockwise). Turning it the other way may cause the thread to tangle and damage the
needle or fabric. You may also be injured.
CAUTION
Stitch Name Pattern
Stitch Length
[mm (inch.)]
Straight Stitch
(Center Needle Position)
2.5 (3/32)
Straight Stitch
(Center Needle Position)
4.0 (3/16)
Straight Stitch
(Left Needle Position)
2.5 (3/32)
Triple Stretch Stitch 2.5 (3/32)
Make sure the needle does not hit a pin
or any other object during sewing. The
thread could tangle or the needle could
break. You could also be injured.
CAUTION
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-2130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-2130 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-2130

Brother XL-2130 User Manual - German - 63 pages

Brother XL-2130 User Manual - Dutch - 63 pages

Brother XL-2130 User Manual - French - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info