618175
88
Zoom out
Zoom in
Previous page
1/192
Next page
86
If the bobbin thread breaks or
runs out
a
Touch , and then press the
thread trimming button.
The upper thread is trimmed.
If the bobbin thread breaks or runs out, also trim the
upper thread.
b
Remove the stitches embroidered only with
the upper thread.
Pull the trim end of the upper thread.
If the stitches cannot be cleanly removed, trim the
thread with scissors.
If the bobbin thread ran out, replace
the bobbin at this point in the
procedure.
c
Replace the bobbin with a bobbin wound
with bobbin thread. (Refer to page 32.)
If the hook cover can be opened, replace the bobbin
without removing the embroidery frame from the
machine.
If the machine bed is hidden, for example, with a bag-
shaped piece of fabric, or if the hook cover cannot be
opened, temporarily remove the embroidery frame.
(Refer to page 58.) After replacing the bobbin, re-
attach the embroidery frame. (Refer to page 44.)
d
Go back through the stitching in the same
way as that described in step
b of “If the
upper thread breaks” on page 85, and then
continue embroidering.
Note
If the embroidery frame is removed before
embroidering of the pattern is finished, be
careful of the following, otherwise the pattern
may become misaligned.
Do not apply extreme pressure to the
framed fabric and cause it to become loose.
When removing and re-attaching the
embroidery frame, do not allow the frame to
hit the carriage or the presser foot.
If the carriage is hit and moves, turn the
machine off, then on again. The correct
frame position at the time that the machine
was stopped is stored in the machine’s
memory, and the embroidery frame is
returned to the correct position.
When the embroidery frame is re-attached,
make sure that the pins on the left and right
arms of the embroidery frame holder
securely fit into the holes in the handles on
the embroidery frame.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother VR in the language / languages: English as an attachment in your email.

The manual is 14,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother VR

Brother VR User Manual - German - 192 pages

Brother VR User Manual - Dutch - 192 pages

Brother VR User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info