618175
79
Zoom out
Zoom in
Previous page
1/192
Next page
OTHER BASIC PROCEDURES
77
3
Hooping the fabric in the large
embroidery frame
a
Loosen the screw on the outer frame.
1 Screw
b
Place the fabric with right side up on top of
the outer frame.
The outer frame does not have a front or back side.
Either side can be used as the front.
c
Press the inner frame into the outer frame.
First insert the inner frame at the corner with the screw
A, next insert the nearby one corner B, and then
insert the opposite corner C. Then insert the opposite
corner of non screw corner D.
First, align the inner and outer frames at the corner
with the screw A. Then, while lightly pulling the
fabric in the direction indicated by arrow B so that the
fabric is taut, insert the inner frame at corner B. In the
same way, lightly pull the fabric in the direction
indicated by arrow C and insert corner C, and then
lightly pull the fabric in the direction indicated by
arrow D and insert corner D.
Be sure that there are no wrinkles in the fabric after it
is stretched in the embroidery frame.
d
While stretching the fabric even more,
securely tighten the screw so that the fabric
is taut.
After stretching the fabric, lightly tapping it should
produce a drum-like sound.
Firmly clamp together the inner and outer frames so
that their tops are even.
1 Outer frame
2 Inner frame
3 Right side of fabric
4 Top of inner and outer frames are even
Using the included screwdriver (large), firmly tighten
the screw.
1 Screwdriver (large)
Hooping the Fabric
Memo
To correctly frame the fabric in the
embroidery frame, we recommend using a
flat surface.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother VR in the language / languages: English as an attachment in your email.

The manual is 14,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother VR

Brother VR User Manual - German - 192 pages

Brother VR User Manual - Dutch - 192 pages

Brother VR User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info