618175
46
Zoom out
Zoom in
Previous page
1/192
Next page
44
After hooping the fabric in the embroidery frame, attach the frame to the embroidery machine.
Attaching the embroidery frame
Adjust the width of the embroidery frame holder to the size of the embroidery frame, and then attach the
embroidery frame to the machine. As an example, the procedure for attaching the medium embroidery
frame is described below.
1 Left arm of embroidery frame holder
Move the arm of the embroidery frame holder to
the left or right to adjust it to the size of the
embroidery frame.
2 Clip on embroidery frame holder.
Insert the embroidery frame into the clips on the
embroidery frame holder.
3 Positioning pin
4 Holes
5 Positioning slots
a
Loosen the two thumb screws on the
embroidery frame holder.
If the screw is too tight, please use the included disc-
shaped screwdriver.
1 Left arm
2 Thumb screws
The left arm of the embroidery frame holder can be
moved.
Only loosen the thumb screws a maximum of 2 turns
counterclockwise. Do not remove the screw.
8. Attaching the Embroidery Frame to the Machine
CAUTION
If the embroidery frame is not correctly attached, it may hit the presser foot and damage the machine, or
cause injury to the user.
When attaching the embroidery frame, make sure that the “Start/Stop” button is lit in red. If the “Start/
Stop” button is flashing in green, the embroidery machine may start embroidering. If the embroidery
machine accidentally starts operating, injuries may result.
When attaching the embroidery frame, make sure that the embroidery frame does not hit any other part of
the embroidery machine.
Note
Before attaching the embroidery frame, check that there is enough thread in the bobbin.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother VR in the language / languages: English as an attachment in your email.

The manual is 14,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother VR

Brother VR User Manual - German - 192 pages

Brother VR User Manual - Dutch - 192 pages

Brother VR User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info