618175
38
Zoom out
Zoom in
Previous page
1/192
Next page
36
k
Press .
The bobbin starts winding. The bobbin stops rotating
when bobbin winding is completed. The bobbin
winding switch will automatically return to its
original position.
l
Cut the thread with the cutter and remove
the bobbin.
1 Cutter
Note
changes to while the bobbin
is winding. Press if you want to stop
before the bobbin is fully wound.
Stay near the machine while winding the
bobbin to make sure the bobbin thread is
being wound correctly. If the bobbin thread
is wound incorrectly, press
immediately to stop the bobbin winding.
Memo
You can change the winding speed by
pressing (to decrease) or
(to
increase) in the bobbin winding window.
•Press
to minimize the bobbin
winding window. Then, you can perform
other operations, such as selecting a stitch
or adjusting the thread tension, while the
bobbin is being wound.
Press (in top right of the LCD
screen) to display the bobbin winding
window again.
Note
When removing the bobbin, do not pull on
the bobbin winder seat. Doing so could
loosen or remove the bobbin winder seat,
and could result in damage to the machine.
CAUTION
Check that the bobbin
thread has been wound
correctly, otherwise the
needle may break or the
thread tension will be
incorrect.
Be sure to clean the bobbin case each time
that the bobbin is changed. Thread wax and
dust easily collect around the hole in the
tension-adjusting spring on the bobbin case,
resulting in an incorrect thread tension. For
details, refer to “Cleaning the bobbin case” on
page 166.
Be sure to check the tension of the bobbin
thread each time that the bobbin is changed.
Depending on the bobbin thread type, the
tension of the bobbin thread may differ. Be
sure to check the tension of the bobbin thread
and adjust the tension if necessary.
For a metal bobbin, use both weights, large (L)
and small (S).
For detailed instructions on how to adjust the
bobbin tension, refer to page 91.
1 Weight (L) (Part Code: XC5974-151)
2 Weight (S) (Part Code: XC6631-051)
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother VR in the language / languages: English as an attachment in your email.

The manual is 14,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother VR

Brother VR User Manual - German - 192 pages

Brother VR User Manual - Dutch - 192 pages

Brother VR User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info