718655
41
Zoom out
Zoom in
Previous page
1/44
Next page
37
Problem Possible Cause Solution
Poor Print Quality.
The ribbon/media is loaded
incorrectly.
Dust or adhesive has
accumulated on the Print
Head.
The print density is set
incorrectly.
The Print Head mechanism
is damaged.
The ribbon/media are
incompatible.
Reload the media/ribbon.
Clean the Print Head.
Clean the Platen Roller.
Adjust the print density and print speed.
Run the printer self-test and check the
Print Head test pattern for missing dots.
Install the correct ribbon/media.
Labels are skipped when
printing.
The label size is not
specified correctly.
The sensor sensitivity is not
set correctly.
The media sensor is dirty.
Check if the label size is set up correctly.
Calibrate the sensor using the Auto Gap
or Manual Gap options.
Clean the Gap/Black Mark Sensor using
a blower brush.
The printing position of small
labels is incorrect.
The media sensor sensitivity
is not set correctly.
The label size is incorrect.
The vertical offset setting in
the driver is incorrect.
Calibrate the sensor sensitivity again.
Set the correct label size and gap size.
If using the BarTender software, set the
Vertical Offset in the driver.
Incomplete printing on the left
or right side of label.
The label size is set up
incorrectly.
Set the correct label size.
Warped labels.
The ribbon is installed
incorrectly.
The media is installed
incorrectly.
The print density setting is
incorrect.
The media is not fed
correctly.
Adjust the print density to improve the
print quality.
Make sure the label guide touches the
edge of the Media Guide Tips.
Blank labels with gray lines.
The Print Head is dirty.
The Platen Roller is dirty.
Clean the Print Head.
Clean the Platen Roller.
Irregular printing.
The printer is in Hex Dump
mode.
Turn the printer on and off to skip the dump
mode. (See section 4.3.2)
For more information about cleaning the printer, see section 7.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother TD-4420TN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother TD-4420TN in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother TD-4420TN

Brother TD-4420TN User Manual - German - 45 pages

Brother TD-4420TN User Manual - Dutch - 44 pages

Brother TD-4420TN User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info