585295
31
Zoom out
Zoom in
Previous page
1/36
Next page
28
STEP
1
STEP
2
STEP
3
Getting started
Reference
Introduction
Installing the software
Reference
If a problem occurs while using this machine, the following may help you to solve the
problems.
Problem Solution
The Brother TD-4000/4100N
machine printer does not print,
or a printing error is received.
Is the cable loose?
Check that the cable is connected securely.
Is the RD Roll installed correctly?
If not, remove the RD Roll and reinstall it.
Is the RD Roll used up?
Replace the RD Roll.
Is the RD Roll compartment cover open?
Check that the RD Roll compartment cover is closed correctly.
Has a print error or transmission error occurred?
Turn off the machine and switch on again. If the problem still
occurs, contact Brother Customer Service.
Does the guide not touch the left side of the paper RD Roll?
Move the guide against the side of the RD Roll.
Is the media on top of the gap sensor?
Feed the media under the gap sensor.
The LED lamp is not lit.
Is the power cord plugged in correctly?
Check that the power cord is plugged in. If inserted, try plugging
it into another electrical outlet.
Has the main power switch located on the back of the machine
been turned on?
Make sure the main power switch is turned on.
* If the power button still does not light up, contact Brother
Customer Service.
The printed label contains
streaks or poor quality
characters, or the label did not
feed correctly.
Is the print head or roller dirty?
While the print head generally remains clean under normal use,
lint or dirt from the roller may become stuck on the printer head.
If this occurs, clean the roller.
See
"Roller maintenance" on page 27.
A data transmission error
appears on the computer.
Is the correct port chosen?
Check that the correct port is chosen from the “Print to the
following port” list in the Printer Properties dialog box.
Is the machine in cooling mode (the LED lamp is flashing in
orange)?
Wait until the LED lamp stops flashing and then try printing
again.
Is someone printing via network (TD-4100N only)?
If you try to print while other users are printing large amounts of
data, the printer is unable to accept your print job until the
ongoing printing is finished. In such situations, execute the print
job again after the other jobs are completed.
Labels are jammed in the cutter
or are not ejected correctly after
printing.
Is there dirt or lint on the roller preventing it from rolling freely?
For details, please see
"Roller maintenance" on page 27.
The label is not ejected correctly
after printing.
Check that the ejection path of the label is not blocked.
Check that the RD Roll is set correctly by removing the RD Roll
and reinstalling.
Ensure that the RD Roll compartment cover is closed correctly.
The print quality is poor
Is there dirt or lint on the roller preventing it from rolling freely?
Clean the roller. For details, please see
"Roller
maintenance" on page 27.
2 Troubleshooting
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother TD-4100N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother TD-4100N in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother TD-4100N

Brother TD-4100N User Manual - German - 42 pages

Brother TD-4100N User Manual - Dutch - 40 pages

Brother TD-4100N User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info