718650
19
Zoom out
Zoom in
Previous page
1/122
Next page
Printing
13
2
Button Functions 2
(Power) button functions
Operation
Turn the printer on
While the printer is turned off, press the (Power) button. The
POWER indicator turns on.
Turn the printer off
While the printer is turned on, press and hold the (Power) button
until the POWER indicator turns off. (If the [Auto Power Off] function
is specified in [Device settings] of the “Printer Setting Tool”, the
printer will turn off automatically after the specified period of inactivity.)
(Feed) button functions
Operation
Feed the paper When the paper type is set to [Die-cut Label] or [Media With Marks]:
Press the (Feed) button to automatically feed the paper to the print
position.
When the paper type is set to [Continuous Length Tape]:
Press the (Feed) button to feed the paper about 25.4 mm.
The default setting is [Continuous Length Tape].
Use [Paper Size Setup] of the “Printer Setting Tool” to register the
paper size information with the printer. For details, see Registering
Paper Size Information With the Printer on page 9.
Establish a wireless LAN
connection (WPS)
(TD-2120N/2130N only)
With the wireless LAN connection enabled, press and hold (5
seconds) this button to easily establish a wireless LAN connection and
install the printer driver. However, your WLAN access point/router
must support Wi-Fi Protected Setup (WPS). For details, see One-Push
Configuration Using WPS on page 99.
Enable/disable Bluetooth mode
(TD-2120N/2130N only)
With the wireless LAN connection disabled, press and hold (5
seconds) this button to switch between enabling and disabling the
Bluetooth connection. For details, see Connecting the Computer and
Printer by Bluetooth on page 104.
(Print) button functions
Operation
Perform the specified operation With the printer idle, press this button to perform the operation
specified in [Device settings] of the
Printer Setting Tool. For
details, see Print Key Function on page 36.
Print the printer setup information Make sure that a roll is installed, and then hold down (at least 1
second) the (Print) button to begin printing the printer setup
information. For details, see Printing the Printer Setup Information
on page 19.
Execute a file stored in the mass
storage area
With the printer in mass storage mode, press this button to execute a
command file stored in the mass storage area.
Resetting the incrementing field
Hold down the (Print) button for at least 5 seconds, until the
POWER and STATUS indicators blink 3 times in orange.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother TD-2130N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother TD-2130N in the language / languages: English as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother TD-2130N

Brother TD-2130N User Manual - German - 122 pages

Brother TD-2130N User Manual - Dutch - 124 pages

Brother TD-2130N User Manual - French - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info