424009
37
Zoom out
Zoom in
Previous page
1/98
Next page
BASIC USE
Telephone
31
5
Telephone
Making a Call
You can use your machine to make voice telephone calls, by dialling manually or by using One
Touch or Speed Dial memory. You can use the handset or if you have the FAX-T76 you can use the
Speakerphone to make and receive calls. For more details, see “Dialling a Number” on page 22 and
22.
The “full-duplex” digital Speakerphone allows you to operate the phone hands free, or allows more
than one person in the room to participate in a two-way phone conversation. When using the
Speakerphone, make sure that you speak clearly. If the other party has difficulty hearing you, move
closer to the microphone.
On Hook Dialling
1
Dial the number by using the dial pad or Quick-Dial keys.
The number you are dialling, or the name you have stored for One Touch or Speed Dial is
displayed on the LCD.
2
For FAX-T74 press Start and pick up the handset when you hear the call answered on the monitor
speaker. If you press Tel before lifting the handset, the call will be disconnected. Replace the
handset to finish the call.
For the FAX-T76, press Start, and when the call is answered, you can now speak to the party at
the other end without lifting the handset. Press Speaker Phone when you finish the
conversation.
Redial
If you’re calling someone and the line is busy, you can retry the number by pressing Redial/Pause.
1
Pick up the handset—OR—Press Speaker Phone.
2
Press Redial/Pause.
3
To hang up, replace the handset—OR—Press Speaker Phone.
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
If your fax machine is connected to a PABX, you may need to insert an additional number prefix
(e.g. “9”) and a “pause” before each fax or telephone number to gain access to the outside line. When
you press Redial/Pause, a dash “-” will appear on the display. By storing a pause, you can create
a delay of 3.5 seconds.
Tone/Pulse
If you have pulse dialling service, but need to send tone signals (for telephone banking, for example).
Follow the directions below, but if you have touch tone service, you do not need this feature to send
tone signals.
1
Lift the handset and press #.
Any digits dialled after this sends tone signals.
When you hang up, the machine returns to pulse dialling service.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother t 76 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother t 76 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother t 76

Brother t 76 User Manual - German - 94 pages

Brother t 76 User Manual - Dutch - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info