555755

Brother Super Galaxie3000 Manual

300
Zoom out
Zoom in
Previous page
1/319
Next page
Troubleshooting 9-5
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
1 Machine is not threaded correctly (used
the wrong spool cap, spool cap is loose,
the thread did not catch the needle bar
threader, etc.)
2 Thread is knotted or tangled.
3 Thread is too thick for the needle.
4 Upper thread tension is too strong.
5 Thread is twisted.
6 Needle is turned, bent or the point is dull.
7 Needle is installed incorrectly.
8 There are scratches near the hole of the
needle plate.
9 There are scratches near the hole in the
presser foot.
0 There are scratches on the race.
1 Bobbin is set incorrectly.
2 There are scratches on the bobbin or it
doesn’t rotate properly.
3 Thread is twisted.
1 Machine is threaded incorrectly.
2 Using improper needle or thread for the
selected fabric.
3 Needle is turned, bent or the point is dull.
4 Needle is installed incorrectly.
5 Needle is defective.
6 Dust or lint is collected under the nee-
dle plate.
Upper
thread
breaks
Rethread the machine correctly.
Re-thread upper and lower thread.
Check needle and thread combi-
nations.
Adjust the thread tension.
Use scissors, etc., to cut the twisted
thread and remove it from the race,
etc.
Replace the needle.
Reinstall the needle correctly.
Replace the needle plate, or con-
sult your authorized dealer.
Replace the presser foot, or con-
sult your authorized dealer.
Replace the race, or consult your
authorized dealer.
Reset the bobbin thread correctly.
Replace the bobbin.
Use scissors, etc. to cut the twisted
thread and remove it from the race,
etc.
Check the steps for threading the
machine and rethread it correctly.
Check the “Fabric/Thread/Needle
Combination” chart.
Replace the needle.
Reinstall the needle correctly.
Replace the needle.
Remove the dust or lint with the
brush.
Bobbin
thread
breaks
Skipped
stitches
Problem Cause
Page
Solution
1-32
1-31, 1-32
1-45
2-13, 5-40
7-2
1-43
1-43
8-2
1-39
8-2
1-31
1-31
7-2
1-32
1-45
1-43
1-43
1-43
8-2
MAKING MINOR MACHINE ADJUSTMENTS
If you have a minor problem with your sewing machine, check the following solutions. If the
solutions suggested do not correct the problem, contact your authorized dealer.
… 300 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Super Galaxie3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Super Galaxie3000 in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info