606047
81
Zoom out
Zoom in
Previous page
1/93
Next page
74
MAINTENANCE
MANTENIMIENTO
5. Turn off the main power supply.
6. Raise the Presser Foot Lever and remove the
fabric as explained in step 2 above. If the fabric
cannot be removed, cut the thread on the back of
the fabric with scissors and remove the fabric.
7. Remove the presser foot holder, needle and
needle plate as explained in “Cleaning” on page
65.
8. Use tweezers to remove thread and dust from
around the moving cutter.
* Sewing with thread and dust under the needle
plate will prevent the moving cutter from operat-
ing properly and prevent the threads from being
cut.
3 Moving cutter
9. Turn the hand wheel toward you and move the
moving cutter and bobbin holder to the left again.
* Starting to sew with the moving cutter at the right
will cause the threads to become tangled again.
4 Bobbin holder
10. Attach the needle plate.
11. Install the bobbin, then feed the lower thread
again from the beginning.
3
4
5. Apague el interruptor principal.
6. Levante la palanca del prensatelas y retire el
tejido, tal como se explica en el paso 2. Si no
puede retirar el tejido, corte el hilo del final del
tejido con unas tijeras y retire el tejido.
7. Retire el soporte del prensatelas, la aguja y la
placa de agujas, tal como se explica en la sección
"Limpieza", en la página 65.
8. Utilice unas pinzas para retirar el hilo y el polvo
acumulados alrededor del cortador móvil.
* Los hilos y el polvo acumulados debajo de la
placa de agujas impiden que el cortador móvil
funcione correctamente, y por tanto no permiten
cortar los hilos.
3
Cortador móvil
9. Gire la rueda manual hacia usted y desplace de
nuevo el cortador móvil y el soporte de la canilla
hacia la izquierda.
* Si empieza a coser con el cortador móvil situado
a la derecha, los hilos volverán a enredarse.
4
Soporte de la canilla
10. Coloque la placa de agujas.
11. Instale la canilla y cargue el hilo inferior desde el
principio.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother STAR 130E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother STAR 130E in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother STAR 130E

Brother STAR 130E User Manual - German, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info