606047

Brother STAR 130E Manual

63
Zoom out
Zoom in
Previous page
1/93
Next page
56
BUTTONHOLE AND BUTTON SEWING
OJALES Y COSTURA DE BOTONES
When the buttonhole is not sewn correctly:
There are two different procedures for correct-
ing buttonhole sewing, depending on which part
of the buttonhole is not sewn correctly.
Correction Procedure 1 (See fig. A)
1. Raise the Presser Foot Lever, then remove the
fabric and all of the sewn thread.
2. Pull the buttonhole lever slightly toward you.
3. Sew about 10 stitches with no fabric in the ma-
chine.
4. Place the fabric under the presser foot again, then
lightly push the buttonhole lever toward the back
of the machine and sew the buttonhole from the
beginning.
Correction Procedure 2 (See fig. B)
1. Raise the Presser Foot Lever, then remove the
fabric and all of the sewn thread.
2. Place the fabric under the presser foot again, then
lightly push the buttonhole lever toward the back
of the machine and sew the buttonhole from the
beginning.
NOTE:
If the buttonhole lever is pushed toward the back of
the machine while sewing any stitch other than a
buttonhole, the buttonhole feed will be used and the
stitch will not be sewn correctly.
If the buttonhole lever is accidentally pushed toward
the back of the machine, lightly pull the buttonhole
lever slightly toward you, sew about 10 stitches with
no fabric in the machine, then raise the buttonhole
lever.
AB
Ojales mal cosidos:
Existen dos procedimientos diferentes para
corregir el cosido de los ojales, en función de la
parte del ojal que se ha cosido de forma
incorrecta.
Procedimiento de corrección 1 (Véase fig. A)
1. Levante la palanca del prensatelas, y retire el
tejido y todo el hilo cosido.
2. Tire ligeramente hacia usted de la palanca de
ojales.
3. Cosa unas 10 puntadas sin tejido.
4. Vuelva a colocar el tejido debajo del prensatelas,
presione ligeramente la palanca de ojales hacia
la parte trasera de la máquina y cosa el ojal desde
el principio.
Procedimiento de corrección 2 (véase fig. B)
1. Levante la palanca del prensatelas y retire el tejido
y todo el hilo cosido.
2. Vuelva a colocar le tejido debajo del prensatelas,
presione ligeramente la palanca de ojales hacia
la parte trasera de la máquina y cosa el ojal desde
el principio.
NOTA:
Si se empuja hacia la parte posterior de la máquina
la palanca de ojales al coser una puntada que no sea
un ojal, entrará en acción la alimentación de ojales
y la puntada no se coserá correctamente.
Si ello sucede por accidente, tire ligeramente hacia
usted de la palanca de ojales, cosa unas 10 puntadas
sin tejido y levante la palanca de ojales.
… 63 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother STAR 130E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother STAR 130E in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother STAR 130E

Brother STAR 130E User Manual - German, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info