606047
50
Zoom out
Zoom in
Previous page
1/93
Next page
43
BUILT-IN STITCHES
PUNTADAS INCORPORADAS
Elastic Stitching
Pattern Stitch Length Stitch Width
(Elastic Stitch) F-2.5 3-6
The Elastic Stitch can be used for 3 functions:
mending, sewing elastic or joining fabric. Each is
explained below.
Set the Pattern Selection Dial to Elastic Stitch.
MENDING
1. Set the Stitch Length Dial between F and 2.5 and
set the Stitch Width Dial between 3 and 6.
2. Place the reinforcement fabric under area to be
mended.
3. Following the line of the tear, sew using the
Elastic Stitch as illustrated in fig. A.
SEWING ELASTIC
1. Place the elastic on the fabric.
2. As you sew, stretch the elastic both in the front
and behind the presser foot as shown in fig. B.
JOINING FABRIC
The Elastic Stitch can be used to join two pieces of
fabric together and is very effective when sewing
knitted fabrics. When nylon thread is used, the stitch
will not be visible.
1. Place the edge of the two pieces of fabric together
and center them under the presser foot.
2. Sew them together using the Elastic Stitch taking
care to keep the two fabric edges close together
as shown in fig. C.
Puntada elástica
Modelo de puntada
Largo de puntada
Ancho de puntada
(Puntada elástica) F-2,5 3-6
Se puede usar la puntada elástica para tres opera-
ciones: los remiendos, la inserción de gomas elásti-
cas y como puntada de unión para juntar dos tejidos.
Ponga el selector de puntadas en la puntada elásti-
ca.
REMIENDOS
1. Ajuste el selector de largo de puntada entre F y
2,5 y el selector de ancho entre 3 y 6.
2. Coloque la tela de refuerzo debajo de la zona a
rematar.
3. Siguiendo la línea de la rasgadura, cosa con la
puntada elástica tal como ilustrado en la fig. A.
INSERCION DE GOMAS ELASTICAS
1. Ponga la goma sobre el tejido.
2. A medida que esté cosiendo, estire el elástico
tanto delante como detrás del prensatelas tal
como se muestra en la fig. B.
PUNTADA DE UNION
La puntada elástica puede servir para unir dos
trozos de tejido y resulta muy eficiente para la
costura de prendas de punto. Si se usa un hilo de
nilón, la puntada resultará invisible.
1. Junte las orillas de ambos trozos de tejido y
céntrelas debajo del prensatelas.
2. Cosalas juntas con la puntada elástica, teniendo
sumo cuidado en mantener las dos orillas de los
tejidos muy juntas, tal como se aprecia en la fig.
C.
A B C
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother STAR 130E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother STAR 130E in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother STAR 130E

Brother STAR 130E User Manual - German, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info