606047
37
Zoom out
Zoom in
Previous page
1/93
Next page
30
KNOWING YOUR SEWING MACHINE
CONOZCA SU MÁQUINA DE COSER
Costura con aguja doble
Su máquina de coser ha sido concebida para poder
utilizar una aguja doble y permitir la costura con dos
hilos superiores. Puede usar el mismo color de hilo
o dos hilos de colores distintos para puntadas deco-
rativas. La aguja doble permite coser cualquiera de
los patrones, exceptuando él para hacer ojales. Sin
embargo, cuando selecciona la puntada recta, el
selector de ancho de puntada debe estar ajustado
de tal forma que la aguja se encuentre en la posición
central (entre 2 y 3). Para los otros modelos de
puntadas, dicho selector puede estar ajustado entre
0 y 3. Véase la página 15 para mayores detalles
sobre el ajuste del selector de ancho de puntada.
ATENCION:
Al coser con una aguja doble, debe asegurarse que el
selector de ancho de puntada no está ajustado en un
valor superior a 3 ya que en esas circunstancias, la
aguja podría golpear la placa de agujas y romperse.
Para introducir la aguja doble
Introdúzcala de la misma manera que una aguja
simple (véase página 9). La parte plana de la aguja
debe estar cara hacia atrás mientras que la parte
redonda está cara a usted.
Colocado el eje de carrete suplementario
Coloque el eje de carrete vertical en el orificio
previsto arriba de la máquina, cerca del eje horizon-
tal. Instale el segundo carrete de hilo en el eje
vertical, tal como ilustrado en la fig. A.
Enhebrado de la aguja doble
Cada una de las agujas debe ser enhebrada por
separado.
1. Enhebrado de la aguja derecha
Observe las mismas instrucciones que para el
enhebrado de una sola aguja, pero utilizando el
hilo del carrete colocado en el porta carretes
extra. (véase página 26 para mayores detalles al
respecto).
2. Enhebrado de la aguja izquierda
Enhebre la aguja izquierda de la misma manera
que la aguja derecha. Sin embargo, no hay que
pasar el hilo por la guía que se sitúa arriba de la
aguja. Conviene pasarlo directamente por el ojo
de la aguja izquierda, tal como ilustrado arriba en
la fig. B.
1
El hilo de la aguja derecha pasa por la guía.
2
El hilo de la aguja izquierda pasa delante de la guía.
Twin Needle Sewing
Your sewing machine is designed for twin needle
sewing, which allows you to sew with two top threads.
You can use the same color or two different colors of
thread for making decorative stitches. Any of the
patterns, except the buttonhole pattern, can be sewn
with the twin needle. When using the Straight Stitch,
the Stitch Width Dial should be set so that the needle
is in the center position (between 2 and 3). However,
when other patterns are used, set the Stitch Width
Dial between 0 and 3. See page 15 for details on
adjusting the Stitch Width Dial.
CAUTION:
When sewing with the twin needle, be sure the Stitch
Width Dial is not set above 3 since this may cause the
needle to hit the needle plate and break.
INSERTING THE TWIN NEEDLE
Insert in the same way a single needle is inserted
(refer to page 9). The flat side of the needle should
face toward the back and the rounded side should
face toward you.
PLACING THE EXTRA SPOOL PIN
Place the vertical spool pin in the hole found on top
of the machine near the horizontal spool pin. Place
the second spool of thread onto the vertical spool pin
as shown in fig. A.
TWIN NEEDLE THREADING
Each needle should be threaded separately.
1. Threading the Right Needle
Follow the same instructions for single needle
threading using the thread from the spool on the
extra spool pin. See page 26 for more details.
2. Threading the Left Needle
Thread the left needle in the same manner that
the right needle was threaded, but do not pass the
thread through the thread guide above the needle
before passing it through the eye of the left needle
as shown below in fig. B.
1
Right needle thread passes through this guide.
2
Left needle thread passes in front of this guide.
A
B
NOTE: (Model PS-2500, STAR140E)
When sewing with the twin needle, do not use the
automatic thread cutter.
1
2
NOTA: (Modelo PS-2500, STAR140E)
Al coser con aguja doble, no utilice el cortahilos
automático.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother STAR 130E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother STAR 130E in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother STAR 130E

Brother STAR 130E User Manual - German, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info