606050
43
Zoom out
Zoom in
Previous page
1/92
Next page
38
GERAD- UND ZICKZACKSTICH
CUCITURA CON PUNTO DIRITTO E ZIG-ZAG
Stoff aus der Maschine nehmen
1. Stoppen Sie die Maschine.
2. Heben Sie die Nadel auf die höchste Position und
vergewissern Sie sich, daß der Gelenkfaden-
hebel sich ebenfalls auf höchster Position befin-
det (Modell STAR 110).
3. Heben Sie den Nähfuß und ziehen Sie den Stoff
vorsichtig nach links heraus.
4.
Schneiden Sie Ober- und Unterfaden mit dem Faden-
abschneider links hinten an der Maschine ab.
1 Fadenabschneider
5. Zur Vorbereitung der Maschine für die nächste
Naht ziehen Sie etwa 10 cm Faden durch den
Nähfuß nach hinten heraus.
Come estrarre il tessuto dalla macchina
1. Arrestare la macchina.
2. Sollevare l'ago nella posizione più alta e accertarsi
che anche la leva tenditrice del filo sia nella
posizione più alta (Modello PS-2200, STAR110).
3. Alzare il piedino premistoffa ed estrarre il tessuto
tirandolo delicatamente verso sinistra.
4. Tagliare i due fili con il tagliafilo incorporato situa-
to sul fianco sinistro della macchina.
1
Tagliafilo
5. Per predisporre la macchina alla cucitura succes-
siva, tirare circa 10 cm di filo attraverso la scana-
latura del piedino premistoffa verso la parte po-
steriore della macchina.
(Modell STAR140E)
1. Drücken Sie nochmals die Taste »START/STOP«.
Die Nadel stoppt auf niedrigster Stellung.
2. Ziehen Sie nach dem Nähen den Abschneide-
hebel nach unten, bis sich die Nadel bewegt.
Nachdem die Fäden abgeschnitten wurden, be-
wegt sich die Nadel nach oben und der Ab-
schneidehebel kehrt in die Grundstellung zurück.
ACHTUNG:
Betätigen Sie den Abschneidehebel nicht während
des Nähens, oder wenn kein Stoff unter der Nadel
liegt. Der Faden könnte sich verheddern, oder andere
Probleme können auftreten.
2 Stoff
1
2
(Modello PS-2500, STAR140E)
1. Premere di nuovo il pulsante "START/STOP".
L'ago si ferma nella posizione più bassa.
2. Quando si è terminato di cucire, tirare verso il
basso la leva del tagliafilo fino a quando l'ago non
si mette in movimento. Dopo aver tagliato i fili,
l'ago si sposta verso l'alto e la leva del tagliafilo si
rimette nella sua posizione originaria.
NOTA:
Non far funzionare la leva del tagliafilo durante la
cucitura o quando non c'è tessuto nella macchina. I
fili potrebbero attorcigliarsi o si potrebbero verificare
altri problemi.
2
Tessuto
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother STAR 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother STAR 110 in the language / languages: German, Italian as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother STAR 110

Brother STAR 110 User Manual - English, Spanish - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info