631349

Brother SL7 Manual

49
Zoom out
Zoom in
Previous page
1/67
Next page
41
MONOGRAMMING (fig. A)
1. Sew moving the hoop slowly along the lettering at a constant
speed.
2. To secure the stitching, set the pattern selection dial to the
Straight Stitch (6-10) with the desired length and sew a few
stitches at the end of the last letter.
EMBROIDERING (fig. B)
1. Stitch the outline of the design by moving the embroidery
hoop.
2. Fill in the design alternating from the outline of the design to
the inside and from the inside to the outline until the design is
completely filled in. Keep the stitching close together.
NOTE:
A long stitch is made by moving the embroidery hoop rapidly and
a short stitch is made by moving it slowly.
3. To secure the stitching, set the pattern selection dial to the
Straight Stitch (6-10) with the desired length and sew a few
stitches at the end of the design.
CAUTION:
Keep fingers away from moving parts, especially needles.
MONOGRAMMES (fig. A)
1. Coudre à une vitesse constante en déplaçant lentement le
tambour le long des lettres.
2. Pour arrêter la couture, régler le sélecteur de modèle de point
sur le point droit (6-10) avec la longueur souhaitée et coudre
quelques points à la fin de la dernière lettre.
BRODERIES (fig. B)
1. Piquer le contour du motif en déplaçant le tambour au fur et à
mesure.
2. Remplir le motif en piquant alternativement à point serrés du
contour vers le centre et du centre vers le bord jusqu’à ce que
le dessin soit entièrement recouvert de points. Veiller à bien
rapprocher les rangées de points.
REMARQUE:
Pour obtenir de grands points, déplacer rapidement le tambour.
Pour faire un petit point, le déplacer lentement.
3. Pour arrêter la couture, régler le sélecteur de modèle de point
sur le point droit (6-10) avec la longueur souhaitée et coudre
quelques points droits à la fin du motif.
PRECAUTION:
Tenir les doigts à l’écart de tout élément mobile, en particulier
les aiguilles.
MONOGRAMAS (fig. A)
1. Cosa moviendo el bastidor lentamente por las letras, a una
velocidad constante.
2. Para asegurar las puntadas, ponga el selector de puntadas en la
puntada recta (6-10) con el largo deseado y cosa unas puntadas al
final de la última letra.
BORDADO (fig. B)
1. Remarque el contorno del diseño, moviendo el bastidor de acuerdo
con el dibujo.
2. Rellene el dibujo de puntadas adelantando alternativamente del
contorno hacia el interior y del interior hacia el exterior hasta que
el dibujo quede completamente cubierto de puntadas, teniendo
siempre cuidado en mantener las puntadas muy juntas.
NOTA:
Se pueden realizar puntadas largas al mover el bastidor rápidamente
y puntadas cortas al moverlo lentamente.
3. Para asegurar las puntadas, ponga el selector de puntadas en la
puntada recta (6-10) con el largo deseado y cosa unas puntadas
rectas al final del dibujo.
ATENCIÓN:
Mantenga los dedos alejados de las piezas móviles, especialmente de
las de agujas.
EXECUÇÃO DE MONOGRAMAS (fig. A)
1. Costure movimentando o bastidor lentamente ao longo do desenho
das letras, a velocidade constante.
2. Para arrematar a costura, coloque o seletor de pontos na costura
reta (6-10), com o comprimento pretendido, e execute alguns
pontos no final da última letra.
BORDAR (fig. B)
1. Costure a linha exterior do desenho movimentando o bastidor.
2. Preencha o desenho costurando alternadamente da borda para
dentro e de dentro para a borda do desenho, até estar
completamente coberto. Mantenha os pontos de costura bem
juntos.
NOTA:
Podem executar-se pontos compridos movimentando o bastidor
rapidamente e pontos curtos, movimentando o lentamente.
1. Para arremator a costura, coloque o seletor de pontos na costura
reta (6-10), com o comprimento pretendido, e execute alguns
pontos no final do desenho.
AV I S O :
Mantenha os dedos fora do trajeto das partes móveis, especialmente
das agulhas.
A
B
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother SL7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother SL7 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother SL7

Brother SL7 User Manual - German, Dutch, French, Italian - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info