631342
52
Zoom out
Zoom in
Previous page
1/63
Next page
51
5
5
Put the darning plate on the needle plate.
Connect the power supply plug into the wall
outlet.
6
Set the Pattern Selection Dial to Straight
Stitch (Center Needle Position).
Before starting to sew, draw the quilting
design on the fabric.
7
Use both hands to keep the fabric firmly
stretched and move the fabric to sew over the
drawn design.
1 Quilting design (Line)
8
The length of the stitch depends on how
quickly you move the fabric and on the
machine’s sewing speed. Sew while moving
the fabric slowly.
Using the 1/4-Inch
Quilting Foot
You can use the 1/4-Inch Quilting Foot to sew fixed
seams when piecing together a quilt.
1 Seam allowance 6.5 millimetres (1/4 inch)
1
Set the Pattern Selection Dial to Straight
Stitch (Center Needle Position (2.5mm
(3/32 inch)).
2
Change the foot to the 1/4-Inch Quilting Foot.
3
Position the presser foot over the fabric and
sew, as shown in the diagram below.
Achieving an accurate seam allowance.
1 Beginning of stitching.
2 Align this mark up the edge of the fabric.
3 End of stitching
4 Align this mark up the edge of the fabric.
Be careful not to touch the needle,
otherwise you may be injured.
Use a screwdriver to tighten the presser
foot holder screw securely. If the screw is
loose, the needle may hit the presser foot
and you may be injured.
Before you start sewing, make sure you
turn the balance wheel toward the front
of the machine to check that the needle
does not hit the presser foot.
CAUTION
1
Stitch Name Pattern
Stitch length
[mm(inch)]
Straight Stitch
(Center Needle Position)
2.5 (3/32)
1
2
1
3
4
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RS-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RS-9 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RS-9

Brother RS-9 User Manual - German - 63 pages

Brother RS-9 User Manual - Dutch - 63 pages

Brother RS-9 User Manual - French - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info