631331
9
Zoom out
Zoom in
Previous page
1/46
Next page
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————
8
2
Raise the needle bar to its highest position.
3
Lower the presser foot.
4
If a needle is already installed, remove it by
loosening the needle clamp with a
screwdriver and pulling the needle down.
1 Screwdriver
Do not use extreme force when
loosening or tightening the needle
clamp screw, otherwise certain parts of
the sewing machine may be damaged.
5
With the flat side of the needle toward the
back of the machine, insert the needle until it
touches the needle stopper.
Tighten the needle clamp.
1 Screwdriver
2 Needle stopper
3 Needle
Checking the Needle
1
The sewing needle must always be straight
and sharp for smooth sewing.
2
To check if the needle is bent, place the flat
side of the needle on a flat surface as shown.
3
Replace the needle if it is bent or dull.
Changing the Presser Foot
You will have to change the presser foot depending
on what you want to sew and how.
Snap-On Type
1
Raise the needle to its highest position by turning
the balance wheel toward you (counterclockwise)
and raise the presser foot lever.
2
Release the foot by raising the lever at the
back of the holder assembly.
Make sure to push in the needle until it
touches the stopper, and securely tighten
the needle clamp screw with a
screwdriver. If the needle is not in fully,
or if the needle clamp screw is loose, the
needle may break or the machine may be
damaged.
1
1
3
2
CAUTION
Always turn off the power before you
change the presser foot. If you leave the
power on and step on the controller, the
machine will start and you may be injured.
Always use the correct presser foot for
the stitch pattern you have chosen. If you
use the wrong presser foot, the needle
may strike the presser foot and bend or
break, and may cause injury.
Only use presser feet that have been
designed to be used with this machine.
Using other any presser feet may cause
an accident or injury.
CAUTION
XL5000us.book Page 8 Tuesday, October 28, 2003 11:01 AM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RS-35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RS-35 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RS-35

Brother RS-35 User Manual - German - 46 pages

Brother RS-35 User Manual - Dutch - 46 pages

Brother RS-35 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info